Pivot Hardwired Swing-Arm Wall Lamp

A closer fit for your
everyday comfort.

The Pivot Hardwired Swing-Arm Wall Lamp is a double-jointed articulated task light in baked-enamel aviation aluminum, with smooth, electroplated pivot joints and a switch built right into the lamp head. This version wires directly into a wall junction box rather than plugging into an outlet, for a clean, cord-free installation. Features Double-jointed swing arm An articulated, double-jointed arm lets you angle and extend the lamp head to where you need it. Aviation aluminum, baked enamel Cast in aviation-grade aluminum with a baked-enamel finish on the shade, and smooth, electroplated joints. Built-in switch, hardwired The switch is built into the lamp head, and the fixture wires directly into a wall junction box. Color Options Blue A bold cobalt blue shade. Yellow A warm mustard-yellow shade. Red A rich brick-red shade. Size Options Standard Arm Upper arm 34 cm, lower arm 25 cm; overall reach approx. 25–31 cm tall when extended. Shown in our Red and Yellow reference photos. Extended Arm Upper arm 45 cm, lower arm 36 cm; overall reach approx. 36–42 cm tall when extended. Shown in our Blue reference photo. The source material shows a "Standard Arm" dimension diagram for the Red and Yellow photos, and a separate, larger "Extended Arm" diagram for the Blue photo — but doesn't explicitly confirm whether both arm lengths are offered in all three colors, or whether each color ships in only the size shown. Please confirm the actual size/color combinations available with your supplier before publishing. Dimensions Standard Arm Upper Arm 34 cm / 13.4″ Lower Arm 25 cm / 9.8″ Height Range 25–31 cm / 9.8″–12.2″ Extended Arm Upper Arm 45 cm / 17.7″ Lower Arm 36 cm / 14.2″ Height Range 36–42 cm / 14.2″–16.5″ Shared Shade Width 20 cm / 7.9″ Wall Plate Φ12 cm / Φ4.7″ Since the arm is articulated, the height figures above represent the diagram's shown position, not a fixed measurement — actual reach varies with the arm angle. Zoom Standard Arm — Dimensions Zoom Extended Arm — Dimensions Specifications Product Name Pivot Hardwired Swing-Arm Wall Lamp Product Type Wall Lamp (Articulated, Hardwired) Material Aviation-Grade Aluminum, Baked Enamel Finish Color Options Blue, Yellow, Red Size Options Standard Arm, Extended Arm — see note above on color/size combinations Bulb Socket E27 Wattage 12W (bulb inclusion not confirmed — see caveat below) Switch Built into the lamp head Wiring Hardwired Mounting Wall Mounted, articulated swing arm Suitable Spaces Bedside, study Environment Indoor This hardwired version was requested as a variant of our plug-in Pivot Swing-Arm Wall Lamp — the original supplier photos and dimension diagrams only showed a plug-in cord and plug, with no hardwired configuration pictured or confirmed. Please verify with your supplier that a genuine hardwired version exists (including its wiring/junction-box requirements and any certification) before publishing this page. The source listing also gives bulb socket (E27) and wattage (12W) but doesn't state whether a bulb is included, nor does it give a color temperature. These have been left out rather than guessed. Installation & Care Requires a wall junction box; wire directly into your home's electrical system per local electrical code. This fixture must be installed by a licensed electrician. Mount to a secure wall surface using hardware suitable for the fixture weight. Wipe the enamel-finished shade and aluminum arm with a soft, dry or slightly damp cloth; avoid abrasive scrubbers or harsh chemical cleaners. Allow the bulb to cool before handling, and switch off power at the breaker before cleaning or relamping. Intended for indoor, dry use. Downloads & Resources Specifications → FAQs What colors and sizes are available? Three colors — Blue, Yellow, and Red — and two arm lengths, Standard and Extended. Please contact us to confirm which arm lengths are available in which colors. Does it come with a bulb, and what socket does it use? It uses a standard E27 socket rated for a 12W bulb. Bulb inclusion wasn't confirmed in the listing we received — please contact us before ordering. Is it hardwired or plug-in? It's hardwired — the fixture wires directly into a wall junction box rather than plugging into an outlet, and the switch is built into the lamp head. Installation should be done by a licensed electrician. How is it mounted? It mounts to the wall via a round base plate, with a double-jointed articulated arm that swings and extends. We recommend secure wall-anchor hardware suited to the fixture weight. How do I clean it? Switch off power at the breaker first, then wipe the enamel-finished shade and aluminum arm with a soft, dry or slightly damp cloth. Avoid abrasive scrubbers or harsh chemical cleaners. × Click anywhere on background or × to close