Solis Alabaster Disc Table Lamp

A closer fit for your
everyday comfort.

Solis is a sculptural table lamp crowned by a flat disc shade — a translucent alabaster top banded in gold-finish metal, topped with a small gold finial. A built-in LED glows up through the stone and washes light down onto the surface below, so the alabaster reads warm and luminous while its natural veining shows through. Below sits a tapered gold-finish metal column that catches light along its length. Compact at 11.8″ Ø × 15.7″ tall (30 × 40 cm) — sized for a nightstand, console, or desk where you want a warm pool of light and a quiet sculptural presence. The integrated LED means there are no bulbs to buy or change. Glowing Alabaster Disc A translucent natural-stone top glows warm when lit, with veining unique to every piece. Tapered Gold Column A slim, cone-tapered gold-finish metal base catches light along its length. Integrated Warm LED A built-in warm-white LED gives an even glow — no bulbs to buy or replace. Each alabaster disc is one-of-a-kind. Alabaster is a soft, translucent natural stone — veining, tone, and the way it glows vary between every piece we cut. The photo shows a representative example, not the exact disc you'll receive, so your stone's character will be its own. Light Source INTEGRATED LED · WARM WHITE Built-in LED The LED is built into the fixture and tuned to a warm white that reads naturally through the alabaster — there are no bulbs to buy or change. The light glows up through the stone and washes gently downward, for ambient rather than task light. The LED is serviced by us if it ever needs attention. Dimensions ×Click to enlarge ↗ Diameter (shade) 30 cm / 11.8″ Height 40 cm / 15.7″ Specifications Shade Natural alabaster disc · gold-finish metal band & finial Column Gold-finish metal · tapered cone Diameter 30 cm / 11.8″ (shade) Height 40 cm / 15.7″ Light Source Integrated LED · warm white (built-in, no replaceable bulb) Voltage AC 110–240 V worldwide Wiring Plug-in · cord with switch Environment Indoor use · dry locations Certifications North America · Europe · Australia · Saudi Arabia Downloads Spec Sheet Frequently asked Does it use a bulb, or is the LED built in? The LED is built into the fixture — there are no bulbs to buy or change. It is tuned to a warm white that reads naturally through the alabaster, giving a soft, even glow rather than bright task light. Why does my alabaster look different from the photo? Alabaster is natural stone; every piece has its own veining, tone, and translucency. No two discs are alike, so the photo is a representative example rather than the exact lamp you'll receive. What size is it, and where does it suit? It stands 15.7″ (40 cm) tall on an 11.8″ (30 cm) disc — a good scale for a nightstand, console, sideboard, or desk where you want a warm, sculptural accent light. How do I clean the alabaster? Alabaster is soft and porous. Dust gently with a clean, dry, soft cloth only. Avoid water, detergents, and chemical sprays, which can seep in and cause permanent staining or etching of the stone. Will the gold finish wear over time? The metal is finished in a warm gold tone, with slight variation between pieces. To protect the finish, dust it with a soft cloth and avoid abrasive pads or chemical cleaners, which can mark a plated finish. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. Where does this lamp work best?+At 11.8″ diameter × 15.7″ tall, Solis suits nightstands, console tables, sideboards, and desks where you want warm, sculptural accent light rather than bright task illumination. Does it use a replaceable bulb?+No. The LED is built into the fixture—no bulbs to buy or change. It tugs to warm white and glows up through the alabaster, casting soft ambient light downward. Why does each lamp look different?+Alabaster is natural stone; every disc has unique veining, tone, and translucency. The product photo is representative only. Your stone's character will be entirely its own. How do I care for the alabaster?+Dust gently with a soft, dry cloth only. Avoid water, detergents, and sprays—they seep into the porous stone and cause permanent staining or etching. Can I order a custom size?+This model is 11.8″ Ø × 15.7″ H. For custom sizing or other variations, contact Vakkerlight—our atelier builds to order and can accommodate special requests.