Flora Pleated Fabric Semi-Flush Mount

A closer fit for your
everyday comfort.

Flora Pleated Fabric Semi-Flush Mount — Scalloped Shade, Metal Base, 3 Sizes A scalloped fabric shade — pleated in vertical panels that gather into a petal-like silhouette — mounts close to the ceiling on a metal base with a dark brown finish. The beige fabric diffuses E27 bulb light upward and outward, spreading ambient light across the ceiling rather than casting a direct downward beam. Available in three diameters (40, 50, and 60 cm / 15.7, 19.7, and 23.6 inches), the Flora works as a semi-flush ceiling light in bedrooms, dining rooms, and living rooms where clearance between ceiling and fixture matters. Key Features Pleated Fabric Shade Vertical pleats gather into a scalloped petal outline; diffuses light through the fabric wall. Semi-Flush Mount Sits close to the ceiling — suitable for rooms with 8–9 ft ceilings where pendant drop isn't ideal. Metal Base Dark brown-finished metal canopy and bottom finial; no painted plastic components. 3 Sizes Available Ø40 × H23 / Ø50 × H29 / Ø60 × H34 cm — select by room size and ceiling clearance requirement. E27 Socket Standard E27 base; accepts a wide range of bulb shapes. Bulb not included. Upward + Ambient Light Fabric walls diffuse light in all directions; no harsh downward-only beam from this fixture. About the Fabric Shade The pleated fabric panels are hand-stitched onto the frame. Minor variation in pleat spacing and shade roundness is normal for this construction method. Do not use steam or an iron directly on the fabric — a soft brush or compressed air removes dust without distorting the pleats. Size Guide Size Diameter Height Recommended Room Small Ø40 cm / 15.7 in H 23 cm / 9.1 in Bedroom, home office, hallway (up to ~120 sq ft) Medium Ø50 cm / 19.7 in H 29 cm / 11.4 in Master bedroom, dining room (120–200 sq ft) Large Ø60 cm / 23.6 in H 34 cm / 13.4 in Living room, open dining area (200–300 sq ft) Ø40 cm / 15.7″H 23 cm / 9.1″ Ø50 cm / 19.7″H 29 cm / 11.4″ Ø60 cm / 23.6″H 34 cm / 13.4″ 🔍 Tap any image to enlarge × × × Choosing a Size A common guideline: add the room's length and width in feet, and the result in inches is a reasonable shade diameter. For example, a 12 × 14 ft bedroom (26 ft total) suggests a 24–26-inch / 60–65 cm shade as a ceiling fixture. Bulb E27 · 1 bulb · Bulb not included Standard E27 medium base. The fabric shade fully encloses the bulb, so bulb shape is not visible from below. A round or globe-form bulb fits the interior geometry cleanly. Specifications Product Type Semi-Flush Mount Ceiling Light Available Sizes Ø40 × H23 cm / 15.7 × 9.1 in · Ø50 × H29 cm / 19.7 × 11.4 in · Ø60 × H34 cm / 23.6 × 13.4 in Shade Material Pleated fabric (beige) Base / Canopy Metal, dark brown finish Color Beige shade / dark brown metal base (as shown) Socket E27 × 1 Bulb Not included Wiring Hardwired Voltage AC 110–240V Use Indoor, dry locations only Certification Compatible with North America, Europe, Saudi Arabia, Australia Spec Sheet (PDF) Installation Notes Hardwired ceiling installation — a licensed electrician is recommended. Compatible with standard wall switch (not included). Dimming possible with a dimmable E27 LED bulb and compatible wall dimmer; no built-in dimmer on this fixture. E27 socket — twist-lock bulb replacement, no tools required. Bulb not included. For indoor, dry locations only. Not suitable for bathrooms or damp areas. Sloped ceiling compatibility depends on canopy hardware; contact us before ordering if your ceiling pitch exceeds 15°. FAQ How much clearance does this fixture need below the ceiling? As a semi-flush mount, the fixture sits close to the ceiling — the metal canopy mounts flush and the shade hangs directly below it. Shade height is 23 cm / 9.1 in (Ø40), 29 cm / 11.4 in (Ø50), or 34 cm / 13.4 in (Ø60), so the total projection below the ceiling stays under about 14 inches. It works on standard 8-foot ceilings without the fixture feeling too low. Which size should I pick for my bedroom or dining room? For a typical 10 × 12 ft bedroom, the Ø50 cm (19.7 in) is a comfortable fit — large enough to fill the visual center of the ceiling without feeling oversized. For a dining table up to 48 inches wide, the Ø60 cm works well centered above the table. The Ø40 cm suits smaller spaces like home offices, hallways, or walk-in closets. Can I use a dimmable bulb with this fixture? Yes — the fixture has a standard E27 socket and no built-in circuitry that would block dimming. Install a dimmable E27 LED bulb and pair it with a compatible wall dimmer switch (Triac or leading-edge dimmer rated for LED). The dimmer switch is not included. How do I clean the pleated fabric shade? Use a soft dry brush or low-pressure compressed air along the pleats to remove dust. Do not use water, damp cloths, or steam — moisture can cause the fabric to shrink or lose its pleat definition. The metal base can be wiped with a dry cloth. Is the Flora certified for use in North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What ceiling height does this fixture work with?+ The Flora semi-flush mount sits close to the ceiling—ideal for rooms with 8–9 ft ceilings. As a semi-flush design, it requires minimal clearance between the canopy and ceiling, making it suitable where pendant drop isn't practical. Which size should I choose for my room?+ Add your room's length and width in feet; the total in inches suggests a good shade diameter. Ø40 cm / 15.7″ × H 23 cm / 9.1″ for bedrooms up to ~120 sq ft; Ø50 cm / 19.7″ × H 29 cm / 11.4″ for 120–200 sq ft; Ø60 cm / 23.6″ × H 34 cm / 13.4″ for 200–300 sq ft living areas. Can this fixture be customized or made to order?+ The Flora is hand-built in our Vakkerlight atelier as a made-to-order piece. Contact us about custom sizing or other modifications beyond the three standard diameters.