Colorful Kids Fabric Pendant Light

A closer fit for your
everyday comfort.

Colorful Kids Fabric Pendant Light — Bell Shade with Hanging Ball Ornaments A woven fabric bell shade — Dia 450 mm (17.7") wide and 480 mm (18.9") tall — hangs from a spray-painted metal crown canopy finished in blue, with a red fabric trim running along the lower rim. Six colorful ball ornaments dangle from the hem on short cords, adding movement and visual weight below the shade. The single E27 socket sits inside the dome, directing diffused ambient light downward through the woven fabric. The shade's off-white woven surface softens the light, making it suitable for a child's bedroom, nursery, or playroom where direct glare needs to be avoided. Key Features Woven Fabric Bell Shade Off-white woven fabric over a metal frame; softens E27 output into diffused ambient light. 6 Hanging Ball Ornaments Colorful resin balls in red, green, blue, yellow, white, and pink hang from the lower hem on short cords. Spray-Painted Metal Frame Iron crown canopy and structural ring; spray-painted finish in blue and red for color accuracy. E27 Standard Socket Single E27 base — compatible with LED bulbs up to 40W. Bulb not included. Nursery-Sized Scale Dia 450 mm shade works over a crib corner, play table, or toddler reading nook — not oversized for small rooms. Fabric + Iron Construction Woven fabric shade over a rigid iron ring; holds shape without collapsing over time. Bulb Not Included This pendant uses a single E27 socket. Use an LED bulb rated up to 40W max. For a children's room, a 2700–3000K warm white LED at 6–8W produces comfortable ambient light without glare through the woven fabric shade. About the Woven Fabric Shade The shade is hand-assembled from woven fabric panels mounted on a shaped iron wire frame. Minor irregularities in the weave pattern or stitching at the rim are a normal result of the fabrication process, not a defect. Colorway Off-White Shade Blue Crown Red Trim Ball ornaments: red · green · blue · yellow · white · pink Dimensions Shade diameter: 450 mm / 17.7"Total height (shade only): 480 mm / 18.9"Hanging rod + cord length: adjustable at installationSocket: E27 · 1 bulb × 🔍 Tap to enlarge Specifications Product Type Pendant Light (Children's / Nursery) Shade Diameter 450 mm / 17.7" Shade Height 480 mm / 18.9" Shade Material Fabric, Metal Frame Finish Spray-painted iron (blue crown, red trim ring) Ornaments 6 colorful resin ball pendants (red, green, blue, yellow, white, pink) Socket E27 × 1 Max Wattage 40W Bulb Not included Wiring Hardwired Voltage AC 110–240V Color Multicolor (off-white / blue / red / multicolor ornaments) Certification Compatible with North America, Europe, Australia, Saudi Arabia Use Dry indoor locations only Spec Sheet (PDF) Installation Notes Hardwired ceiling installation — a licensed electrician is recommended. Compatible with a standard wall switch (not included). This pendant is not rated for dimmer switches unless a dimmable E27 LED bulb with its own dimming circuit is used. E27 socket — insert and twist bulb clockwise to lock. Bulb not included. For indoor dry locations only. Not suitable for bathrooms, laundry rooms, or covered outdoor areas. The hanging cord length can be adjusted at the ceiling canopy before final installation. FAQ Does this pendant work in a nursery for a newborn? Yes. The woven fabric shade diffuses E27 output across the room without direct glare, which suits nurseries where a baby may be lying on their back looking upward. Use a 6–8W warm white LED (2700–3000K) rather than a brighter bulb to keep the overall light level comfortable for a sleeping infant. What type of E27 bulb should I use? Any standard E27 LED bulb up to 40W max. A round or globe-shaped bulb (like a G95 or G80) fits inside the socket without touching the fabric shade. Do not use incandescent or halogen bulbs above 25W — the heat output is too close to the woven fabric material. How high should I hang it above a child's bed or play table? For ambient lighting over a play table, set the bottom of the shade at approximately 150–160 cm (59–63") from the floor — high enough that a child standing at the table won't touch the hanging ball ornaments. Over a crib or bed, a mounting height of 180–200 cm (71–79") from the floor is typical. Adjust the hanging cord at the ceiling canopy before securing the fixture. Can the hanging ball ornaments be removed? The ball ornaments attach to the shade hem on short fixed cords. They can be untied and removed if you prefer a cleaner look, but they are not designed to be reattached as a snap-on mechanism — once removed, retying them to the original position requires manual knotting. Is this pendant certified for use in the United States? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia, and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size room or ceiling height does this pendant suit?+The 17.7″ diameter shade is nursery-scaled and works over a crib corner, play table, or toddler reading nook in standard 8–9′ ceilings. Hanging cord length adjusts at installation for your exact drop height. Which bulb should I use, and what color temperature works best?+Use an E27 LED bulb rated up to 40W max. For children's rooms, a warm white 2700–3000K LED at 6–8W produces comfortable ambient light through the woven shade without glare. Bulb not included. What are the six colored ball ornaments made from?+The ornaments are colorful resin balls in red, green, blue, yellow, white, and pink. They hang from short cords at the lower hem and add visual movement and weight to the design. Is this pendant suitable for a newborn's nursery?+Yes. The woven fabric diffuses light evenly across the room without direct glare—safe for a baby lying on their back. Use a warm 6–8W LED for soft, comfortable ambient light. Can I customize this pendant, and how is installation handled?+Each piece is hand-built in our atelier. Hardwired ceiling installation requires a licensed electrician. The hanging cord adjusts at the canopy before final installation. A standard wall switch controls the light.