Elara Swag Pendant Light

A closer fit for your
everyday comfort.

A tall sculptural pendant — a long, sweeping fabric shade with soft petal-like folds that catch and diffuse the light into a gentle wash. Two diameters hang from a long 177′′ (450 cm) plug-in cord, designed as a statement piece for lofts, stairwells, double-height foyers, and large dining tables. In-line on/off switch on the cord, so no electrician is needed. Long sculptural form A long fabric body with soft petal-like folds — sculptural, lit or unlit. Soft diffused glow The beige fabric diffuses the bulb into a warm, even wash — no harsh spot. Plug & play 177′′ (450 cm) cord with in-line on/off switch — ceiling-hook hanging, no electrician. Two Sizes Size Diameter Best for Small 15.7′′ (40 cm) Stairwell, tall foyer, narrow double-height space Large 19.7′′ (50 cm) Large dining table, double-height living room, loft × × 🔍 Tap to enlarge Material Metal, Fabric Shade Beige fabric with soft petal-like folds Body finish Gold metal frame Light source One E26/E27 medium-base bulb · max 40W (LED or Edison-style filament bulb) Light color Warm white (pick bulb temperature to taste) Small 15.7′′ (40 cm) diameter Large 19.7′′ (50 cm) diameter Power Plug-in cord, AC 110–240V Cord 177′′ (450 cm) cord with in-line on/off switch and standard wall plug Mounting Ceiling hook (hardware included); flat or sloped ceilings (slope ≤ 30°) Use IP20 indoor and dry locations only Spec Sheet (PDF) Plug-in cord routing — plan before mounting The 177′′ (450 cm) cord runs from the ceiling hook down to a standard outlet. In an open space this means the cord is visible — plan to mount the ceiling hook close to a wall and use a discreet cord cover along the wall and outlet path. Gather any extra cord length neatly at the hook. Need a hardwired version instead? Email us before ordering. Use an LED or Edison-style filament bulb — fabric shade is heat-sensitive The fabric body encloses the bulb and traps heat upward. Use only an LED or Edison-style filament bulb up to 40W — incandescent and halogen bulbs run hot enough to discolor and embrittle the fabric over time. Do not exceed the wattage on the socket label. Installation & Care Hang from the ceiling using the included hook — drywall anchor or stud is needed. The ceiling can be flat or sloped (up to 30°). No electrician required; once mounted, plug the cord into a standard outlet. Plan the cord route before mounting. The 177′′ (450 cm) cord adjusts to your hanging height — gather the excess at the hook and route the rest along ceiling-to-wall corners or a discreet cord cover for a clean look. For a dining table or kitchen island, hang so the bottom of the shade sits 30–36′′ above the surface. Adjust by sliding the cord through the canopy. Use one E26/E27 bulb, max 40W. LED or Edison-style filament bulb only — never incandescent or halogen on a fabric shade. Bulb not included. Controlled by the in-line switch on the cord. Not designed for external dimmer compatibility on the wall circuit. For dimming, use a smart LED bulb with its own dimming feature. Indoor and dry locations only (IP20). Not for outdoor exposure, bathrooms with shower spray, or kitchens directly above a cooktop where steam and grease build up — fabric absorbs both. Dust the fabric with a soft brush or vacuum gently with an upholstery attachment. Spot-clean only — never machine-wash, never submerge. The metal frame can be wiped with a soft, dry cloth. FAQs How long is the cord, and how high can I hang it? The plug-in cord is 177′′ (450 cm) long, so you can hang the pendant high and still reach an outlet, or shorten the drop by gathering excess cord at the ceiling hook. Slide the cord through the canopy to set your preferred hanging height for the space. Is this plug-in or hardwired? Plug-in. The 177′′ (450 cm) cord ends in a standard wall plug and has an in-line on/off switch. Hang the pendant from the included ceiling hook and run the cord to an outlet; no electrician or wall-switch wiring needed. If you need a hardwired version instead, email us before ordering. Can it be installed on a sloped ceiling? Yes — up to a 30° slope. The ceiling hook accommodates angled ceilings, and the cord hangs straight down by gravity regardless of the mounting angle. Confirm slope before drilling the hook anchor. Can I use an Edison-style filament bulb? Yes — a clear Edison-style filament bulb (LED filament version recommended) shows nicely through the open bottom of the shade for a warm vintage-look glow. A frosted LED gives a softer, evener pool of light. Both work; pick whichever look fits the room. What's the warranty? 2-year warranty on wiring, plug, switch, socket, and the metal frame. Hand-finished fabric variation (slight differences in folds, color tone, weave) is not a defect; fabric discoloration or embrittlement from using an over-spec or incandescent bulb, water stains, and impact damage are not covered. Email support with photos within 7 days of delivery for any transit damage. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size should I choose for my dining table or double-height space?+The 15.7″ diameter suits stairwells and narrow double-height spaces; the 19.7″ diameter works best for large dining tables and lofts. Hang the shade 30–36″ above the table surface for dining. How long is the cord, and do I need an electrician?+The 177″ (450 cm) plug-in cord connects to any standard outlet—no electrician needed. Route the cord along walls or use a discreet cord cover; gather excess length at the ceiling hook. How do I clean the fabric shade?+Dust gently with a soft brush or vacuum with an upholstery attachment. Spot-clean only; never machine-wash or submerge. Wipe the gold metal frame with a soft, dry cloth. Can the Elara be customized or hardwired?+The Elara is hand-built in our atelier. For a hardwired version instead of plug-in, email us before ordering to discuss custom modifications.