Bloom Rattan Swag Pendant Lamp

A closer fit for your
everyday comfort.

The Bloom is a plug-in rattan pendant — a swag light that hangs from a ceiling hook and plugs into any wall outlet, with no hardwiring or electrician needed. Hand-woven natural rattan forms overlapping, petal-like layers on a black metal frame, and the weave glows warm when lit. A 15′ cloth cord with an inline on/off switch lets you place it anywhere near an outlet. 11.8″ wide — for a bedroom, reading corner, or small dining nook. Please note Rattan is a natural material; the weave and tone of your shade will vary slightly from the photos. Rated IP20 for indoor, dry locations only — keep away from moisture, and use a cool-running LED bulb. Features Plug-in swag, no wiring Hangs from a ceiling hook; the cord drapes to a standard outlet. No junction box or electrician. Hand-woven rattan petals Natural rattan layered into a flower-petal shade on a black metal frame; tone varies by piece. One bulb + inline switch One E26/E27 socket for an LED or Edison bulb, with an on/off switch right on the cord. At a Glance One head 11.8″ diameter × 10.2″ tall — sized for a bedroom, reading corner, or small dining nook. Swag cord & switch 15′ cloth cord with a US plug and inline on/off switch; drape and adjust to your ceiling. Default configuration Single-head pendant: hand-woven natural rattan shade on a black metal frame, with a 15′ plug-in swag cord, ceiling hook, and inline on/off switch. Takes one E26/E27 bulb. AC 110–240V. Hardwired & multi-head versions Prefer a hardwired install, or want a 2- or 3-head cluster on a square or round canopy? Those versions are available on request — email us with your setup for options and lead time. Shape Diagram Single-head dimensions. Click the diagram to enlarge. × 🔍 Click to enlarge ↗ Specifications Material Metal, rattan, fabric Shade finish Natural rattan Body finish Black Light source One E26/E27 socket — LED or Edison bulb (not included) Size Ø 11.8″ × H 10.2″ (Ø 30 × 26 cm) Voltage AC 110–240V Power supply Plug-in swag — 15′ cloth cord with US plug + inline on/off switch Mounting Ceiling swag hook — no hardwiring Moisture rating IP20 — indoor, dry locations only Control Inline on/off switch on cord Certification Certified for North America, EU, Australia, and Saudi Arabia Spec Sheet (PDF) Installation Notes No electrician or junction box — screw the swag hook into a ceiling joist, hang the pendant, drape the cord to the wall, and plug into a standard outlet. The 15′ cord covers most ceiling-to-outlet runs; gather extra length at the hook or use a cord stay. For a sloped ceiling, use a swivel swag hook so the pendant hangs level. Use an E26/E27 LED bulb, not incandescent or halogen, so the rattan and fabric stay cool. Warm white (2700K) suits the natural weave. Indoor, dry locations only (IP20) — keep away from moisture and open flame. Rattan is a natural material — weave pattern and color vary slightly by piece; the photo shows a representative sample. FAQs Does this plug-in rattan pendant need hardwiring or an electrician? No. It's a swag light: hang it from a ceiling hook, drape the cord to the wall, and plug into any standard outlet — no junction box, no electrician. That makes it renter-friendly and easy to move. How long is the cord and where should I hang it? The cloth swag cord is 15′ (about 4.6 m), so the pendant can hang well away from the outlet. Mount it over a nightstand, reading chair, or small dining table, then drape the cord to the nearest socket. What bulb does it use, and will US bulbs fit? One E26 or E27 bulb (not included) — US E26 bulbs thread in and run on 120V. Use a cool-running LED, not incandescent or halogen, so the rattan stays cool; warm white (2700K) gives the coziest glow. Can I get a hardwired or multi-head version instead? Yes. Hardwired single-head, plus 2- and 3-head clusters on square or round canopies, are available on request. Email us your ceiling setup before ordering. What's the warranty and how do I care for the rattan? 2-year warranty on the frame, cord, and switch. Dust the rattan with a soft brush; keep it dry. Bulbs are standard replaceable E26/E27 LEDs. Email support replies within one business day at hello@vakkerlight.com. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size is the Bloom and which rooms suit it best?+11.8″ diameter × 10.2″ tall—sized for bedrooms, reading corners, and small dining nooks. For larger dining tables or kitchens, custom sizing is available from our atelier. Is the rattan shade natural, and will it vary?+Yes, hand-woven natural rattan with a black metal frame. Rattan is a natural material, so weave pattern and tone vary slightly by piece. Use a cool-running LED bulb (2700K warm white suits the weave best). What kind of bulb does this pendant take?+One E26/E27 socket for LED or Edison-style bulbs (not included). Use LED only—incandescent and halogen run too hot for the rattan and fabric shade.