Cone Swing Arm Wall Sconce

A closer fit for your
everyday comfort.

Cone Swing-Arm Wall Sconce — Articulated Directional Illumination A swing-arm wall sconce with a small cone shade and a discreet pull-cord switch—finished in glossy painted iron across the shade, arm, and slim baseplate. The articulated arm extends in two segments (30 + 20 cm), so the cone can sit close against the wall or reach about 20″ (50 cm) into the room as a directional reading light beside a bed, sofa, or armchair. ∅ 25 cm shade, hardwired to a standard junction box behind a 6 × 25 cm rectangular baseplate. Available in two colors: Pomegranate Red or Tangerine Orange. One E27 socket; bulb sold separately. Key Highlights Two-Segment Swing Arm 30 + 20 cm articulated arm—fold flat against the wall or swing out to about 50 cm reach. Cone Shade + Pull Cord Compact cone with a thin pull-cord switch hanging from the side—no wall switch required. Painted Iron, Two Colors Glossy enamel finish across shade, arm, and baseplate in Pomegranate Red or Tangerine Orange. Color Finishes Pomegranate Red Deep burgundy red Tangerine Orange Vibrant warm orange Available in two distinct finishes: Pomegranate Red (deep wine/burgundy tone) and Tangerine Orange (vibrant warm citrus). Swatches are digital approximations; actual painted iron may shift slightly with room lighting. E27 Bulb Sold Separately The cone shade conceals one standard E27 socket. The bulb is not included so you can match your preferred color temperature. We recommend a warm-white LED at 2700–3000K, around 400–600 lumens for a reading-light feel, in a standard A-shape bulb up to 40W equivalent. Two-Segment Articulated Arm Mechanics The arm is built from two segments: a 30 cm inner section hinged at the baseplate, and a 20 cm outer section hinged where the cone attaches. Each joint pivots independently, holding its position through calibrated friction. Adjust gently by hand without forcing past the natural travel range. Integrated Pull-Cord Switch A thin braided pull-cord hangs from the side of the cone shade. A short tug toggles power directly at the fixture, making it ideal beside a bed, in a reading corner, or in spaces lacking convenient wall switch wiring. Enamel Painted Iron Finish & Custom Orders Each sconce is welded from iron tubing and sheet, then finished in durable glossy enamel paint. For project quantities or a bespoke color request, please contact our team before ordering. Product Size Component Metric Dimensions Imperial Dimensions Cone Shade Dia 25cm × H 19cm ∅ 9.8″ × H 7.5″ Wall Baseplate W 6cm × L 25cm W 2.4″ × L 9.8″ Articulated Arm L 30cm + 20cm (~50cm reach) L 11.8″ + 7.9″ (~19.7″ reach) Dimension Diagrams Click thumbnail to zoom ∅ 25 cm · Arm 30+20 cm × Specifications Shade Dimensions ∅ 9.8″ × H 7.5″ (∅ 25 × H 19 cm) Baseplate W 2.4″ × L 9.8″ (W 6 × L 25 cm) Arm L 11.8″ + 7.9″ (L 30 + 20 cm) · Two-segment articulated · ~50 cm max reach Colors Pomegranate Red · Tangerine Orange Material Welded iron tubing and sheet · Glossy enamel paint Light Source 1 × E27 socket · Bulb sold separately · Max 40W equivalent Switch Pull-cord on shade · No wall switch required Voltage AC 110–240V (120V compatible) Mounting Hardwired to standard wall junction box · Indoor dry locations Suitable Spaces Bedside, reading nook, hallway, beside sofa or armchair, guest room Certification Compatible with North America, CE, SAA, SASO, KC Certification Setup Notes Hardwired to a standard wall junction box behind the baseplate—we recommend a licensed electrician for installation. Plan mount height so the pull-cord hangs within easy reach when seated or standing (typically 130–150 cm from floor). Allow clearance for the swing arm: approx. 50 cm outward reach plus the cone's 25 cm diameter. Unpack carefully—lift the sconce by the baseplate or arm hinge, avoiding pulling by the shade or pull-cord. Install one E27 bulb up to 40W equivalent—a warm-white LED at 2700–3000K, 400–600 lumens suits reading use. Indoor dry locations only—not rated for bathrooms with steam exposure, covered porches, or outdoor use. Adjust the two arm segments by hand; joints hold position through friction without forcing past natural travel range. Wipe the painted finish with a soft, dry cloth. The pull-cord can be wiped with a slightly damp cloth and dried promptly. Downloads & Resources Spec Sheet (PDF) Request 3D Files Frequently Asked Questions How does the swing arm work? The arm has two segments: a 30 cm inner section hinged at the wall baseplate, and a 20 cm outer section hinged where the cone attaches. Each joint pivots independently, allowing you to fold the arm flat against the wall, swing it out fully to ~50 cm reach, or position it at any angle. The hinges maintain position by calibrated friction. What bulb does it use and is it included? The fixture uses one standard E27 socket. The bulb is sold separately so you can select your desired warmth. We recommend a warm-white LED at 2700–3000K, around 400–600 lumens, in a standard A-shape or globe filament bulb up to 40W equivalent. How does the pull-cord switch work? A thin braided cord hangs from the side of the cone shade. A short tug turns the lamp on; another tug turns it off. It operates independently of any wall switch, ideal for bedside or reading chair installations without nearby pre-wired switches. What colors are available and how do they differ? This fixture is offered in two distinct enamel finishes: Pomegranate Red (a deep burgundy, wine-toned red that pairs beautifully with warm wood, terracotta, and leather) and Tangerine Orange (a vibrant, warm citrus tone that provides an energetic accent). Can the sconce be installed in a bathroom or outdoors? No. The fixture is rated strictly for indoor dry locations. It is not suitable for bathrooms with shower steam, covered outdoor porches, or damp exterior walls.