Coconut Disc Chandelier

A closer fit for your
everyday comfort.

This sculptural chandelier scatters dozens of hand-carved composite discs across a gold-finished metal frame, layered like petals or coconut shell pieces in a dome silhouette. It measures ∅ 32.3″ x H 21.7″ (∅ 82 x H 55 cm) and hangs from an adjustable chain, sized for a dining table, foyer, or living room. Pick matte white, matte black, or cream to match your room. Color — choose one Matte White Matte Black Cream Features Hand-carved discs Dozens of small composite discs layer across the frame, each shaped and sanded by hand. Domed silhouette The disc cluster opens downward in a wide dome ∅ 32.3″ across, casting warm light across the table. Adjustable chain drop Gold chain trims on site to set your drop height, with a 6.3″ canopy at the ceiling. Handmade variance Each piece is hand-finished The discs are carved, sanded, and finished by hand, so every chandelier shows minor surface marks and slight tonal variation across the discs. These are characteristics of the craft, not defects. If you prefer a perfectly uniform machine finish, this piece may not be the right fit — email us with any questions before ordering. Bulbs Nine E14 bulbs sold separately Uses 9 standard E14 (small Edison screw) bulbs at 5W each. The fixture is designed for warm-white 3000K LED bulbs; matching color tone across all 9 sockets gives the most cohesive glow. Bulbs are not included. Finish Gold frame, three disc colors Gold-finished metal frame across all three SKUs — only the disc color changes. For project quantities or a longer chain drop, email us before ordering. Shape Diagrams Official dimension sheet (shared across all three colors). Click to enlarge.  Coconut-Disc Chandelier∅ 82 x H 55 cm Click to view full size ↗ Specifications Dimensions ∅ 32.3″ x H 21.7″ (∅ 82 x H 55 cm) Canopy ∅ 6.3″ (16 cm) Material Gypsum-Resin Composite, Metal Color Matte White, Matte Black, or Cream (select above) Frame finish Gold Craft Hand-carved and hand-sanded discs Light source 9 × E14 sockets · 5W each · bulbs sold separately Color temperature 3000K warm-white recommended Voltage 120V (AC 110–240V global) Drop Adjustable gold chain, trimmable on site Mount Hardwired ceiling junction box, indoor dry locations Certification Listed · North America · CE · SAA · SASO · KC Installation Notes Hardwired to a standard ceiling junction box; we recommend a licensed electrician. Unpack carefully — the composite discs are individually attached and can chip if knocked against the box. Trim the chain to set your drop height before final installation. Install 9 E14 bulbs at 5W each, warm-white 3000K LED recommended. Do not exceed the rated wattage on the fixture label. Center over a dining table, hung roughly 30–36″ above the surface, or at least 7 ft above the floor in open areas. Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use. Dust the discs with a soft brush; avoid wet cleaning, which can mark the composite surface. Downloads & Resources Spec Sheet (PDF) Request 3D Files FAQ Will my chandelier look exactly like the photos? The discs are hand-carved, hand-sanded, and finished individually, so every fixture is slightly different. You'll see small surface marks, subtle tonal variation, and an organic, irregular layout of discs across the frame. The photos are representative — the look is in the family but not identical piece to piece. What bulbs does it use and are they included? The chandelier uses 9 standard E14 (small Edison screw) bulbs at 5W each, and the bulbs are not included. We recommend warm-white 3000K LED bulbs around 400 lumens each, matched in color tone across all 9 sockets for an even glow. Which color suits my room? Matte white reads soft and gallery-like against neutral walls. Matte black gives a graphic, sculptural contrast in modern rooms. Cream sits warmest, pairing with oak, travertine, and earth tones. The gold frame stays the same across all three. How high should the ceiling be? We recommend at least an 8 ft ceiling, with the chandelier hung 30–36″ above a dining table. In open areas, keep 7 ft of clearance from the floor to the lowest disc. The chain is trimmable on site for shorter drops. How do I clean it? Dust the discs with a soft brush or a dry microfiber cloth. Avoid wet cleaning — the composite material can mark or stain if water sits on the surface. Email support if a disc needs replacement.   Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size dining table does this chandelier fit?+At ∅ 32.3″, this chandelier works well over round tables 48–60″ across or rectangular tables 36–48″ wide. Hang it 30–36″ above the table surface for balanced proportion and even light scatter. How do I adjust the drop height?+The gold chain is adjustable and trimmable on site. The 6.3″ canopy mounts to your ceiling junction box; trim chain to your desired drop before final installation. We recommend a licensed electrician. Which color should I choose?+Matte White & Gold suits bright, minimalist spaces. Matte Black & Gold anchors modern or dark interiors. Cream & Gold bridges warm and neutral palettes. All three pair with the gold frame. Will each chandelier look identical?+No. Hand-carved and hand-sanded discs show minor surface marks, subtle tonal shifts, and organic disc placement. Every piece is unique—this handmade variance is characteristic of the craft, not a defect. What bulbs does it use and how do I install them?+Nine E14 sockets at 5W each; bulbs sold separately. Use warm-white 3000K LED bulbs for a cohesive glow. Install after final chain trim and mounting, observing the rated wattage on the fixture label.