Donut Travertine Pendant Lamp

A closer fit for your
everyday comfort.

A donut travertine pendant — a flat, rounded ring of natural travertine on a slim black downrod, with an open base that casts a warm downward glow. The hand-cut stone reads soft and pebble-smooth, with the porous surface catching light along its curve. ⌀7.9″ × H2.8″, integrated LED. For dining tables, kitchen islands, bedsides, and entryways. Features Rounded donut form A flat, soft travertine ring — low and wide, with rounded edges that read calm and pebble-like. Natural travertine Hand-cut stone with open pores and color banding — every piece reads slightly differently. Integrated LED Built-in 15 W LED in 2700K warm white casts a soft downward pool from the open base. AC 110–240V. About natural travertine The ring is hand-cut from natural travertine. Open pores, surface pitting, and color banding vary piece to piece — these are core characteristics of the stone, not defects or damage. No two are identical. About the wood part The internal holder is real wood — grain pattern and tone vary by piece. It is largely concealed within the fixture, and the photograph shows a representative sample. Dimensions & Diagrams ⌀7.9″ (20 cm) × H2.8″ (7 cm) · adjustable downrod. Click any diagram to enlarge. × × × Specifications Material Travertine, Wood, Metal Body finish Black metal downrod and canopy; wood internal holder Shade finish Natural travertine Dimensions ⌀7.9″ × H2.8″ (⌀20 × H7 cm) Light source Integrated LED · 2700K warm white · dimmable · 15 W · 1,425 lm Wattage 15 W per head Luminous flux 1,425 lm (95 lm/W) LED service LED replaceable at authorized service Voltage AC 110–240V (universal) Mounting Hardwired, ceiling-suspended on a slim rigid downrod Moisture rating IP20 — indoor, dry locations only Control Compatible with standard wall switch or dimmer (not included) Certification Listed · North America · CE · SAA · SASO · KC Installation Notes Hardwired ceiling install — a licensed electrician is recommended. The fixture hangs from a slim rigid downrod; over a table or island, set the drop so the base of the stone sits 30–36″ above the surface. The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture. Dimmable with a compatible wall dimmer (not included). Travertine is a porous natural stone — open pores, surface pitting, and color banding are core characteristics of the material, not flaws or damage. No two rings are identical. The wood holder is real wood — grain and tone vary by piece. Indoor dry locations only (IP20); keep clear of direct water, as stone and wood both absorb moisture. Downloads & Resources Spec Sheet 2-Installation Guide Request 3D Files FAQs How is this different from the other travertine pendants? Its shape and orientation. The Donut is a low, wide travertine ring that hangs flat and casts light down through an open base — a quiet, horizontal silhouette. The Sliced Globe is a cut sphere, the Ribbed a vertical ribbed cylinder, the Hourglass two stacked bowls, and the Squircle a drum under a square plate. Pick Donut for the lowest-profile, most pebble-like look. The travertine has holes and pits — is that a defect? No — those are natural to travertine. Open pores, surface pitting, and color banding are core characteristics of the stone, not flaws or shipping damage. The ring is hand-cut, so no two are exactly alike; that variation is the point of a natural-stone fixture. Is the LED replaceable? The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture. How low does it hang, and where does it work best? It hangs from a slim rigid downrod, so the drop is fixed on install (shortened on-site, or ordered longer for stairwells). The low ⌀7.9″ × H2.8″ profile suits a single spot over a nightstand, a small table, or in a row over an island. Email us your ceiling height for a custom drop. Can I install it in a bathroom, and what's the warranty? Only away from water — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. Travertine is porous and absorbs moisture. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support replies within one business day at hello@vakkerlight.com. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size should I choose for my kitchen island or dining table?+For a dining table or island, the 2-Head (L 21.7″) or 3-Head (L 39.4″) work best depending on surface length. Hang so the stone base sits 30–36″ above the work surface. Single-head suits smaller accent zones. Our atelier can custom-size the downrod length to fit your ceiling height. Can this pendant be dimmed?+Yes, the integrated LED is dimmable with a compatible wall dimmer (not included). Standard dimmers work with this fixture. Confirm dimmer compatibility with your electrician during installation. What is the natural travertine look like—are the holes and pits defects?+No. Open pores, surface pitting, and color banding are core characteristics of natural travertine, not defects. Each hand-cut ring reads slightly differently. The porous surface catches light and creates the material's warm, organic character. Can the LED be replaced?+The LED is integrated into the fixture. When end-of-life arrives, contact Vakkerlight with your order number for authorized LED replacement service rather than replacing the entire pendant. What is the installation process?+This is hardwired, ceiling-suspended on a slim rigid downrod. A licensed electrician is recommended. The fixture mounts to your ceiling electrical box; the electrician adjusts the downrod drop so the stone sits at table height (typically 30–36″ above the work surface).