Victorian Fringe Table Lamp

A closer fit for your
everyday comfort.

Victorian Fringe Table Lamp — Beaded Botanical Shade, Walnut Wood Base A vintage style bedside table lamp with a turned solid wood base in walnut finish and a six-panel fabric shade printed with green botanical leaves, edged in gold beaded trim and long beaded fringe. A single E27 bulb casts warm, filtered light through the panels and down through the fringe — soft ambient glow, not task light. At Ø7.9 in × H16.5 in (Ø20 × H42 cm), it fits standard nightstands, console tables, and dressers, and suits Victorian, bohemian, eclectic, art nouveau, and vintage farmhouse interiors. Common uses: bedroom bedside lamp, living room accent lamp, reading nook mood lighting, and side table décor. Features Six-Panel Fabric Shade Fabric panels with green botanical leaf print, gold beaded edge trim. Beaded Fringe Trim Long gold-tone beaded fringe hangs from each panel point. Turned Wood Base Solid wood spindle base in walnut finish, weighted for stability. E27 Bulb Socket Standard E27 base, one bulb. Use any E27 LED or filament bulb. Plug-In Cord US standard plug. Inline on/off switch. No electrician required. Compact Footprint Ø7.9 in shade, H16.5 in total — fits standard nightstands. About the Fabric Shade Each shade is hand-assembled with sewn panels and hand-strung fringe. Small variations in stitching, bead spacing, and print alignment are normal — not defects. Clean with a soft brush or compressed air; do not wash or steam. Bulb Recommendation For the warmest vintage glow, use a 2700K E27 LED filament bulb at 40W equivalent or lower. Vintage Edison bulbs (ST64, G80) enhance the warm-light effect. Dimensions Shade diameterØ20 cm / Ø7.9 in Total height42 cm / 16.5 in Base materialSolid wood Base finishWalnut Click to enlarge ↗ Light Source E27 · 1 bulb · Bulb not included. Compatible with standard E27 LED, filament, and incandescent bulbs at 110–240V. Specifications Product type Table lamp (bedside / accent) Style Victorian / Bohemian / Vintage Shade Six-panel fabric with green botanical print, gold beaded trim and fringe Base Solid wood, turned spindle, walnut finish Dimensions Ø20 × H42 cm (Ø7.9 × H16.5 in) Bulb base E27 × 1 (not included) Wattage Max 40W (60W equiv. LED recommended) Voltage AC 110–240V Installation Plug-in, no electrician required Switch Inline on/off switch on cord IP rating IP20 Use environment Indoor, dry locations only Certification Listed · North America · CE · SAA · SASO · KC Installation Notes Plug-and-play setup — no wiring or electrician required. Plug directly into a standard US wall outlet. Turn on and off with the inline switch on the power cord. Screw in an E27 bulb (not included) before plugging in. Do not exceed 40W incandescent or 60W LED equivalent. For indoor use only. Not suitable for bathrooms, kitchens above the sink, or any damp location. Place on a flat, stable surface. Keep the fabric shade away from heat sources and open flames. Downloads Spec Sheet FAQ What rooms and styles does this lamp work best in? Best as a bedside lamp on a nightstand, an accent lamp on a living room side table, or a vanity lamp on a dresser. The Victorian shade and beaded fringe suit eclectic, bohemian, art nouveau, vintage farmhouse, and maximalist interiors. Also works in reading nooks and small entryway consoles. What bulb should I use? One E27 bulb, 40W max (incandescent) or 60W LED equivalent. A 2700K warm-white LED filament bulb or vintage Edison-style amber bulb (ST64, G80) gives the closest match to the antique look. Bulb not included. Is the lamp dimmable? No — the lamp has an inline on/off switch only. To dim it, use a dimmable E27 bulb with a plug-in dimmer module (sold separately). Wall dimmers do not work since the lamp is plug-in, not hardwired. How do I clean the fabric shade and fringe? Dust with a soft-bristle brush or compressed air, top to bottom. Gently run fingers through the fringe to release tangles. Do not wash, steam, or wipe with water — moisture stains the printed fabric and discolors the beads. Is this lamp certified for use in North America? Yes. It is listed for North America and also holds CE (Europe), SAA (Australia), SASO (Saudi Arabia), and KC (Korea) certifications. The lamp operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size nightstand or table will this lamp fit?+At Ø7.9″ with 16.5″ total height, it fits standard nightstands, console tables, and dressers. The compact footprint won't overcrowd a typical bedside surface. Does it require an electrician to install?+No. It's plug-and-play with a standard US outlet and inline on/off cord switch. Screw in an E27 bulb, plug in, and turn on. No wiring needed.