Lyra Alabaster Wall Sconce

A closer fit for your
everyday comfort.

SOLID ALABASTER · BRONZE-FINISH HARDWARE · 63″ VERTICAL · HARDWIRED · INTEGRATED LED A 63-inch alabaster capsule with a slim bronze spine — a vertical sconce designed to flank tall mirrors and stairwells Lyra is a vertical wall sconce built around a 63-inch alabaster capsule — translucent stone that glows softly across its full length when lit. A slim bronze-finish steel spine runs down its center, anchored at four bronze disc points to the wall. Hardwired installation by a licensed electrician. Sized for tall mirror flanking, stairwell pairings, and dramatic entry foyers — anywhere a single statement vertical light reads better than a row of shorter sconces. The capsule is just 7.1″ wide and 4.3″ deep, so it sits flat against most architectural walls. Solid Alabaster Capsule Cut from natural alabaster — translucent stone with fibrous veining unique to each piece. Glows softly along its full 63-inch length. Bronze-Finish Spine Slim vertical bronze-finish steel spine with four disc anchor points — provides architectural rhythm against the soft glow of the alabaster. Hardwired Installation Connects to a standard junction box — requires a licensed electrician. Integrated LED with ~50,000 hour rated life. What it's made of Capsule Solid natural alabaster — translucent, hand-cut, fibrous veining unique to each piece Hardware Bronze-finish steel — spine, disc anchors, and wall mount Light Source Integrated LED strip distributed along the inner capsule Each alabaster capsule is one-of-a-kind. Alabaster is natural translucent stone formed over millennia — fibrous veining direction, tonal warmth, and translucency vary between every piece we cut. About the bronze-finish hardware. The spine, disc anchors, and wall mount are bronze-finish steel — not solid bronze. The antique-bronze tone is a durable powder-coated finish. Installation HARDWIRED · LICENSED ELECTRICIAN REQUIRED Junction Box Installation Lyra connects to a standard recessed junction box. Total fixture weight is approximately 12 lb (5.5 kg). The wall mount is anchored at the top, with three additional disc points stabilizing the 63-inch length. We recommend installation by a licensed electrician. Renovating? Best installed during electrical rough-in. For retrofitting, your electrician may need 30-60 minutes per sconce to secure the anchoring system. Color temperature DEFAULT 3000 K Warm White Soft amber-toned glow that complements the natural cream of alabaster. Integrated LED strip distributed along the full length. Rated for roughly 50,000 hours. Need a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order. Dimensions Click to enlarge ↗ Width 18 cm / 7.1″ Height 160 cm / 63″ Depth 11 cm / 4.3″ Weight ~5.5 kg / 12 lb Specifications Capsule Solid natural alabaster — single-piece Hardware Bronze-finish steel — spine, four disc anchors, wall mount Width 18 cm / 7.1″ Height 160 cm / 63″ Depth 11 cm / 4.3″ Weight ~5.5 kg / 12 lb Light Source Integrated LED strip · ~50,000 hours rated life Color Temperature 3000 K (default) · 4000 K / 6000 K on request Voltage AC 110–240 V worldwide Installation Hardwired — licensed electrician required Environment Indoor — damp-rated for bathroom away from direct spray Certifications North America · Saudi Arabia · Europe · Australia Downloads Spec Sheet Frequently asked Where does Lyra look best? Flanking tall bathroom mirrors, side of a stairwell landing, or framing a grand entry foyer. It needs vertical "breathing room" to read correctly. Can I dim this light? Yes, Lyra is compatible with most Triac-based wall dimmers. Smart dimmers like Lutron Caséta work as well. How do I clean it? Wipe gently with a soft dry cloth. For deep cleaning of stone, a slightly damp cloth with water only. Avoid acidic cleaners. Is it certified for global use? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What spaces work best for Lyra?+Lyra's 63″ height suits tall mirror flanking, stairwell pairings, and dramatic entry foyers. At 7.1″ wide and 4.3″ deep, it sits flat against most walls without protruding. Is Lyra made to order?+Yes. Each alabaster capsule is hand-cut from natural stone—veining, translucency, and tonal warmth vary per piece. Custom color temperatures (4000 K neutral or 6000 K cool) available; message us before ordering. What's required for installation?+Hardwired to a standard junction box by a licensed electrician. Total weight ~12 lb; anchored at top with three disc points down the length. Plan 30–60 minutes for retrofit installation. How is Lyra lit?+Integrated LED strip runs the full 63″ inner capsule length, rated ~50,000 hours. Default 3000 K warm white; 4000 K and 6000 K available on request before purchase. What makes the alabaster glow?+Natural translucent alabaster is cut as a single piece and lit from within by the LED strip. Each fixture glows uniquely—fibrous veining and tonal warmth differ across every hand-cut capsule.