
Product detail 1
Shown from the product media supplied for this item.

Find your comfortable side.
Cairn is built from four hand-cut alabaster sections — each carved into a tapered diamond — stacked in alternating orientation along a single column....
Cairn is built from four hand-cut alabaster sections — each carved into a tapered diamond — stacked in alternating orientation along a single column. The natural translucence of alabaster lets warm light glow through every section evenly, revealing the stone's fibrous veining from within. The whole column rests on a solid marble base. Compact footprint at 28 × 24 cm (11″ × 9.4″) — stands beside a sofa, in a reading corner, or as a single sculptural anchor in a foyer. Available in two heights: 59″ (150 cm) or 44.9″ (114 cm). Plug-and-play with integrated LED — no electrician required. Default 3000 K warm white; custom 4000 K or 6000 K available on request. Hand-Cut Alabaster Diamonds Four diamond-shaped sections cut from natural alabaster — each carries its own fibrous veining and tonal warmth. No two columns are identical. Even Translucent Glow Integrated LEDs distributed along the column light every section evenly — no dim sections, no hot spots. Reads as one continuous glow. Solid Marble Base Square marble base anchors the column securely. Plug-and-play on a 5 ft cord — no electrician required. What it's made of Column Four sections of solid natural alabaster — translucent stone, hand-cut and polished Base Solid marble — matte black finish, square footprint Light Source Integrated LEDs distributed along the inner column Each alabaster section is one-of-a-kind. Alabaster is a natural translucent stone formed over millennia — fibrous veining, tonal warmth, and grain direction vary between every section we cut. The four diamonds in your column will read as a family but never as identical twins. The marble base may also show subtle pattern variation between pieces. Dimensions Standard × 🔍 Click to enlarge Width 28 cm / 11″ Depth 24 cm / 9.4″ Height 150 cm / 59″ Compact × 🔍 Click to enlarge Width 28 cm / 11″ Depth 24 cm / 9.4″ Height 114 cm / 44.9″ Color temperature DEFAULT 3000 K Warm White Soft amber-toned glow that complements the natural cream of alabaster and the warm undertones in the marble base. Integrated LEDs are rated for roughly 50,000 hours of use — at 3 hours per day, that's over 45 years of light. Need a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order and we'll configure it for you at no extra cost. Specifications Column 4 × solid natural alabaster diamond sections Base Solid marble · matte black finish · square Width 28 cm / 11″ Depth 24 cm / 9.4″ Height 150 cm / 59″ (Standard) · 114 cm / 44.9″ (Compact) Light Source Integrated LED · ~50,000 hours rated life Color Temperature 3000 K (default) · 4000 K / 6000 K on request Voltage AC 110–240 V worldwide Wiring Plug-in · 5 ft (1.5 m) cord with inline switch Environment Indoor (damp-rated, away from direct moisture) Best For Living room corners · beside a sofa · entry foyers · reading nooks · gallery-style spaces · bedroom anchor pieces · open-plan dining rooms Certifications North America · Saudi Arabia · Europe · Australia Downloads Spec Sheet Installation Guide Frequently asked Will the alabaster sections all look the same? No — and that's the point. Alabaster is natural stone, so each of the four diamond sections will have its own veining direction and tonal warmth. The four pieces in your column will read as a coherent family — same color tone, same finish — but never as identical twins. Can I replace the bulbs? Cairn uses integrated LEDs distributed along the inner column. They're rated for roughly 50,000 hours of service, which is over 45 years at 3 hours per day. For warranty service or if a section ever fails, contact our team directly. Which height should I choose? The Standard (59″ / 150 cm) reads as a full floor lamp — a strong vertical presence beside a sofa or in a foyer. The Compact (44.9″ / 114 cm) sits at side-table height and works well in tighter corners, beside an armchair, or where ceiling height or sight-lines make a taller lamp feel heavy. Both share the same footprint and light output. Is the marble base heavy enough to keep it stable? Yes — the solid marble base is intentionally weighted to anchor the column securely against accidental bumps. For households with pets or small children, we recommend tucking the cord along the wall so it can't be pulled. Lift from the marble base (not the alabaster sections) when repositioning. How do I clean it? Wipe gently with a soft dry cloth — both the alabaster column and marble base. For deeper cleaning, use a slightly damp cloth, never soak the stone or use acidic cleaners (lemon, vinegar, bleach), which will permanently etch both alabaster and marble. Does the alabaster glow when lit? Yes — alabaster is naturally translucent. When the integrated LEDs are on, each diamond section glows softly from within, revealing the fibrous veining like a slice of frozen amber. The effect is most striking in dimmer rooms; in brightly-lit daytime spaces, the column reads as a sculptural object first and a light second. Is Cairn certified for North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What are the two sizes available?+Cairn comes in two heights: 45″ tall (compact) or 59″ tall (standard). Both have a footprint of 11″ wide × 9.4″ deep, so the compact fits tighter spaces like beside sofas or in reading nooks. What color temperature does it come in?+Default 3000 K warm white. Custom 4000 K neutral or 6000 K cool white available on request at no extra cost—message before ordering and we'll configure it. Do I need an electrician to install it?+No. Cairn is plug-and-play with a 5 ft cord and inline switch. Choose your plug type (US, UK, AU, or EU) and plug into any standard outlet—no wiring required. How long do the integrated LEDs last?+Integrated LEDs are rated for roughly 50,000 hours—at 3 hours per day, that's over 45 years of light. They're distributed along the column for even, shadow-free glow.


Shown from the product media supplied for this item.

Shown from the product media supplied for this item.

Shown from the product media supplied for this item.
Material information appears here only when it has been confirmed for this product.

Compare the product profile and options shown in the gallery.
WidthDepthCheck the product description and available options for confirmed measurements.
Follow the care label and the confirmed instructions supplied with this product.
The selected product variant and quantity shown above.
Only dimensions confirmed on this page or in the product description should be used.
Estimated delivery is 7–15 business days. See shipping policy.
Eligible items may be returned within 30 days. See conditions.