Nomad Magnet Rechargeable Wall Lamp

A closer fit for your
everyday comfort.

A walnut-wood wall sconce that magnetically detaches into a portable handheld light. The lamp body lifts off the wall plate with a gentle pull — use it as a fixed sconce when mounted, or carry it as a wand for late-night hallways, closets, or bedside reading. Battery-powered with USB-C charging and 4-hour runtime. Touch sensor on the wood handle switches between three color temperatures (3000K / 4000K / 6000K) and dims by hold. No wiring, no electrician — mount the plate with screws or adhesive. ⚠ What this lamp is — and what it isn't Ambient and accent light, not main illumination. The integrated 1W LED produces nightlight-to-low-ambient brightness — bright enough to navigate a dark hallway, find your way to the bathroom, or set evening mood, but not bright enough to read a book by alone. For reading, pair it with a primary reading lamp. For mood lighting, ambient hallway use, or as a portable emergency light, this is its purpose. Features Magnetic detach Pull the wand off the wall plate at any time — carry it to bed, hallway, or closet. Snaps back into place with a satisfying click. USB-C rechargeable 4-hour runtime per charge. Charges from any USB port — power bank, laptop, or wall adapter. Cable included. 3 color temperatures + dim Tap the wood handle to cycle between 3000K warm, 4000K neutral, and 6000K cool. Hold to dim. Where it works best Hallway nightlight Late-night bathroom trips, sleeping pets, kids' rooms Closet interior Stick to closet door — no wiring through cabinetry Bedside accent Wall-mounted above a nightstand; detach for handheld use Rental-friendly Adhesive mount option leaves no holes; takes 5 minutes to install Stairway / entryway Two together for symmetric ambient light without wired conduit Emergency backup Always charged on the wall; grab during power outage Configuration Touch control on the wood handle Single tap = on/off. Double tap = cycle color temperature. Long press = dim from 100% down to 10%. Mount: screw or adhesive Wall plate mounts with 2 screws (drywall anchors included) or via 3M VHB adhesive strip (included). Adhesive holds 1+ lb. Finish Walnut wood Light wood White diffuser (fixed) Specifications Dimensions Ø1.0″ × 7.1″ tall (2.5 × 18 cm) · wall plate Ø3.5″ Material Walnut or light wood handle and wall plate · metal internal frame · frosted acrylic diffuser Light source Integrated LED — 1W, ~80 lumens Color temperature 3000K warm · 4000K neutral · 6000K cool — switchable via touch Battery Built-in rechargeable lithium-ion · ~4-hour runtime per charge Charging USB-C (cable included) — ~2.5 hours to full charge Mounting Screws (drywall anchors included) or 3M VHB adhesive (included) Control Touch sensor on the wood handle — tap, double-tap, hold Body finish Walnut wood (dark) or Light wood — choose at checkout Certification Certified for North America, EU, Australia, and Saudi Arabia Warranty 1 year on battery · 2 years on LED and fixture Setup & Use Screw mount: Hold the wall plate where you want it, mark the two screw points with a pencil, drill pilot holes, install drywall anchors if needed, then screw the plate to the wall. Snap the lamp onto the magnet. Adhesive mount: Clean the wall with isopropyl alcohol, peel the backing from the 3M VHB strip on the plate, press firmly for 30 seconds. Wait 2 hours before attaching the lamp. Charge for 2.5 hours before first use. Subsequent charges take similar time. Keep charged for emergency-light reliability. Indoor dry locations only. Not for bathrooms with direct shower spray or outdoor use. FAQs How long does the battery last and what's the charging time? ~4 hours of runtime at full brightness on a single charge. Dimming extends runtime significantly — at 25% brightness, expect 12+ hours. Charging from empty takes ~2.5 hours via USB-C from any standard USB-A or USB-C port (5V/1A or higher). Will the adhesive hold over time? The included 3M VHB adhesive holds 1+ lb of pull weight on clean, smooth surfaces (painted drywall, painted wood, tile). It will not hold on textured wallpaper, rough plaster, or unpainted brick. For long-term peace of mind on a critical mount, use the screw option instead. Can the battery be replaced when it eventually wears out? Lithium-ion batteries typically last 500–1000 full charge cycles (~3–5 years of daily use). The battery is not user-replaceable, but we offer a paid battery service after warranty — send the lamp back, we replace the cell and return it. Email info@vakkerlighting.com for details. Is it bright enough for reading? No — at 1W (~80 lumens) it's ambient/nightlight level, not task-bright. For comparison: a typical reading lamp is 8–15W LED (~400–800 lumens). Use the Nomad for mood lighting, nightstand accent, hallway navigation, and as a portable backup; pair with a primary reading lamp for reading. What's the warranty? 1-year warranty on the battery (covers significant capacity loss in normal use); 2-year warranty on the LED, touch sensor, magnetic mount, and finish. Email info@vakkerlighting.com with photos for any warranty claim — replies within one business day. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. Can I take this sconce off the wall and use it as a portable light?+Yes. The wand magnetically detaches from the wall plate with a gentle pull. Carry it to bed, hallway, closet, or anywhere you need handheld light. It snaps back onto the wall with a satisfying click. Does this require an electrician to install?+No wiring needed. Mount the wall plate using 2 screws (drywall anchors included) or adhesive strip (included). Adhesive mounts leave no holes and hold 1+ lb. Takes 5 minutes. What finishes and colors are available?+Choose Walnut Wood & White or Wood Color & White. Both feature a wood handle and wall plate with a frosted acrylic diffuser. Available in warm light (3000K) with switchable color temperatures via touch. Is this bright enough for reading or main room lighting?+No. The 1W LED (~80 lumens) provides nightlight-to-ambient brightness—ideal for hallway navigation, closets, bedside accent, or mood lighting. Pair with a primary lamp for reading.