Vertex Chandelier

A closer fit for your
everyday comfort.

A geometric chandelier — a faceted black metal frame of angled rods meeting at suspended vertices, each holding an amber-tinted glass globe with a visible Edison bulb inside. Mid-century modern silhouette with an industrial edge. Available in four sizes from compact 5-globe (16.5″) to statement 21-globe (68″ diameter). For dining tables, foyers, and great rooms. See It In Action Installation walkthrough — frame assembly & lit ambiance ⚠ Sizes vary dramatically — measure before ordering The four sizes span from 16.5″ (small 5-globe) to 68″ diameter × 42″ tall (21-globe statement). The 21-globe requires 16+ ft ceilings and at least a 12 ft wide room. Even the 10-globe is 43″ wide and needs an 11+ ft ceiling. Measure your room dimensions and ceiling height before choosing the size — see the size matrix below. Email info@vakkerlighting.com with your room photo + ceiling height for a personalized recommendation. Features Faceted geometric frame Angled black metal rods meet at suspended vertices — the frame itself is a sculptural feature, not just a holder. Amber globe + Edison bulb Tinted amber glass globes reveal the warm filament of a vintage-style Edison bulb at every vertex — the bulb is part of the look. 4 sizes / 4 scales 5, 10, 15, or 21 globes — compact accent up to room-defining statement. Choose Your Size 5-globe — Compact Ø16.5″ × H 11″ + 7.9″+3.9″ rod (42 × 28 cm) Smallest. Best as a single accent over a side console, in a small breakfast nook, or in a tall narrow stairwell. 8–9 ft ceilings OK. 10-globe — Medium Ø43.3″ × H 23.6″ + 3.9″ rod (110 × 60 cm) Most versatile. Sized for a 6–8 ft dining table, kitchen island, or in a great room with 11+ ft ceilings. 15-globe — Large Ø42.5″ × H 33.5″ + 3.9″ rod (108 × 85 cm) Taller version of the 10-globe — same diameter but more vertical drop. Needs 13+ ft ceilings. Best in foyers or two-story dining rooms. 21-globe — Statement Ø68.1″ × H 42.1″ + 3.9″ rod (173 × 107 cm) Largest. 5.5+ ft wide × 3.5 ft tall. Requires 16+ ft ceilings, a wide room (12+ ft), and a structurally rated junction box. Email us before ordering. Glass color options The default and stocked finish is amber-tinted glass — pairs naturally with the Edison filament inside. White opal, clear, and other tints are available as made-to-order (4–6 week lead time, no upcharge). Email info@vakkerlighting.com to request alternate glass colors before placing your order. Finish Matte black (frame) Amber (glass, default) White opal (MTO) Clear (MTO) Specifications Sizes 5-globe (Ø16.5″) · 10-globe (Ø43.3″) · 15-globe (Ø42.5″ tall) · 21-globe (Ø68.1″) Material Powder-coated matte black metal frame · hand-blown amber-tinted glass globes Light source E26 (NA & CA) or E27 (EU/AU) — Edison filament LED recommended, ≤7W per bulb (40W equivalent), sold separately Total bulbs 5 / 10 / 15 / 21 sockets matching the chosen size Voltage AC 110–240V (universal) Mounting Hardwired ceiling mount with rigid suspension rod (not cable) Frame finish Matte black (fixed) Glass finish Amber-tinted (default, stocked) · White opal, Clear, alternate tints (made-to-order) Suspension rod 3.9″ standard (also 7.9″ for the 5-globe); extensions on request Control Compatible with TRIAC dimmers and standard wall switches (not included) Certification Certified for North America, EU, Australia, and Saudi Arabia Warranty 2 years on frame, finishes, and wiring; broken glass replaced free on arrival Installation Notes Licensed electrician strongly recommended for 15-globe and 21-globe sizes. The 21-globe size requires a structurally rated junction box (verify with your electrician before ordering). Multi-person installation required for the 15- and 21-globe sizes. Frame ships partially assembled in a flat carton; glass globes ship packed separately in foam dividers. Final assembly happens on-site — attach each globe to its socket after the frame is mounted overhead (push gently, do not force). Bulb selection is critical to the look. Edison filament LED bulbs (ST64, G80, or G125 shape) are recommended — the visible filament through amber glass is the design intent. Avoid frosted bulbs (defeats the transparency) and high-wattage halogen (heat damages amber tint over time). Use ≤7W LED per bulb. Indoor dry locations only. Not for bathrooms, kitchens above stovetops, or covered outdoor areas — moisture damages the matte black powder coat. Downloads & Resources Spec Sheet Installation Guide FAQs Which size should I order — 5, 10, 15, or 21 globes? By room: 5-globe — accent over a small side table, breakfast nook, or stairwell (8–9 ft ceilings OK). 10-globe — 6–8 ft dining table or kitchen island (11+ ft ceilings). 15-globe — same diameter as 10-globe but with more vertical drop, for foyers or two-story dining rooms (13+ ft ceilings). 21-globe — full statement for grand foyers, great rooms, or commercial spaces (16+ ft ceilings, 12+ ft wide rooms). When in doubt, go up one size — chandeliers rarely look too big in proportional rooms. What bulbs should I use? Edison filament LED bulbs (ST64, G80, or G125 globe shapes) — the visible warm filament through the amber-tinted glass is the design intent of this chandelier. Use 2200K–2700K warm-white LED, ≤7W each (40W incandescent equivalent). Look for "vintage filament LED" or "Edison-style LED" at any lighting retailer. Avoid frosted/cloudy bulbs (defeats the transparent amber look) and halogen (heat damages the tinted glass over time). Can I get glass colors other than amber? Yes — white opal, clear, smoke grey, and other tints are available as made-to-order with a 4–6 week lead time (no price upcharge). The amber is the only stocked color for fast shipping. To request another tint, email info@vakkerlighting.com before placing your order with your preferred glass color and size. Is it dimmable? Yes — compatible with standard TRIAC (forward-phase) wall dimmers like Lutron Caséta or Leviton, paired with dimmable Edison filament LED bulbs. All globes dim together on one circuit. Dimming is highly recommended — at full brightness with 10–21 bulbs, this fixture is bright; dimmed to 40–60%, the filaments glow at their most evocative warm intensity. What's the warranty? 2-year warranty on the frame, finishes, sockets, and wiring. Glass globes that arrive broken in transit are replaced free with photo evidence emailed within 7 days. After warranty, replacement globes are available as paid-service parts (kept in stock for 3 years after your order). Edison-style bulbs are standard replaceable parts. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. Which size works for a dining table?+The 10-globe (43.3″ diameter × 23.6″ tall) is most versatile for a 6–8 ft dining table with 11+ ft ceilings. The 15-globe (42.5″ diameter × 33.5″ tall) fits the same footprint but requires 13+ ft ceilings. Email info@vakkerlighting.com with your room photo for a personalized fit. What ceiling height do I need?+The 5-globe works with 8–9 ft ceilings. The 10-globe needs 11+ ft, the 15-globe requires 13+ ft, and the 21-globe demands 16+ ft ceilings. All sizes include a standard 3.9″ suspension rod; custom extensions are available. Can I choose a different glass color?+Amber-tinted is stocked standard. White opal, clear, and other tints are available made-to-order (4–6 week lead time, no upcharge). Email info@vakkerlighting.com before placing your order to request alternate glass colors. How do I clean the globes?+The hand-blown amber-tinted glass globes expose each Edison bulb visibly, making them sculptural. Gently wipe dust from the outside with a soft, dry cloth. Avoid harsh solvents on the frame finish.