Heron Glow Candle Warmer Lamp

A closer fit for your
everyday comfort.

Heron Glow Candle Warmer Lamp — walnut heron sculpture, brass fitting, no flame needed. A heron carved from walnut wood — its neck arched, its beak bent downward — holds a polished brass GU10 fitting from which a small forest-green cone shade hangs. The halogen bulb inside generates enough warmth to gently melt the surface of a candle placed beneath it, releasing fragrance continuously without a flame. It is part lamp, part sculpture, part ritual object — a piece that transforms how you experience scent at home. A twisted copper fabric cord completes the composition. Available in Gold, Walnut, and Black. ⚠  Must use a GU10 HALOGEN bulb — LED will NOT work LED bulbs do not generate sufficient heat to melt candle wax. To function as a candle warmer, this lamp requires a GU10 halogen bulb, purchased separately. A standard GU10 halogen at 35–50W is recommended. Do not install an LED GU10 for candle-warming use — the wax will not melt and the warming function will not work. ⚠  Aromatherapy wax not included. The lamp warms candle wax placed in a suitable vessel beneath the shade. Use any standard soy or paraffin wax melt or candle; the halogen bulb gently melts the top surface to release fragrance. Plug-in — no installation required Runs on a 59″ (150 cm) twisted copper fabric cord with an inline on/off switch. Place on any surface, plug in, and it is ready. No hardwiring, no electrician. Features Carved Walnut Heron Hand-shaped walnut silhouette — a sculptural animal form that stands as art when unlit. No-Flame Candle Warming Halogen heat melts wax continuously — fragrance without fire, smoke, or soot. Polished Brass Fitting GU10 brass holder + forest green cone shade — vintage craft detail at the lamp’s heart. How to Use as a Candle Warmer 1 Install a GU10 halogen bulb (35–50W, sold separately) LED bulbs will not work. A halogen GU10 is required to generate the warmth needed to melt wax. 2 Place a wax melt or candle in a suitable vessel beneath the shade A low, wide vessel (wax melt dish or flat candle) works best. The shade should be positioned 2–4 cm above the wax surface. 3 Switch on — wax will begin to soften and release fragrance within minutes The halogen bulb gently melts the top surface of the wax as it warms the air beneath the shade. Fragrance is released continuously without combustion. Body Finish Options Shade is forest green on all versions. Select body finish at time of order. Gold Polished brass and gold tones — warm, rich, vintage Walnut Wood Natural walnut grain — organic, warm, nature-inspired Black Matte black finish — graphic, contemporary, bold Size × Tap to enlarge Single size L 6.3″ × W 6.3″ × H 12.6″ L 16 × W 16 × H 32 cmMaterials: Walnut Wood, BrassCord: 59″ twisted copper fabric cordShade: Forest Green Bulb Requirement GU10 Halogen — bulb not included, required for candle warming This lamp requires a GU10 halogen bulb (35W or 50W recommended). Halogen bulbs generate radiant heat that warms wax at close range — this is the mechanism by which the candle warmer function works. Standard GU10 halogen bulbs are widely available from hardware and lighting retailers. A 35W halogen provides gentle warming; a 50W halogen provides faster and stronger warming for thicker wax blocks.Do not use a GU10 LED bulb for candle warming — LED bulbs emit minimal heat and will not melt wax. A GU10 LED may be used if you wish to use the lamp purely as a decorative desk light without the candle-warming function. Specifications Materials Walnut Wood, Brass Size L 16 × W 16 × H 32 cm  /  L 6.3″ × W 6.3″ × H 12.6″ Bulb base GU10 Required bulb type Halogen only — LED will not generate sufficient heat to melt wax Voltage AC 110–240V Cord 59″ twisted copper fabric cord with inline on/off switch Power supply Plug-in — no hardwiring required Function Decorative table lamp + flameless candle warmer Wax included No — aromatherapy wax sold separately Environment Indoor only Body finish options Gold  ·  Walnut Wood  ·  Black Shade finish Forest Green Certification North America · EU · AU · Saudi Arabia Downloads Spec Sheet Frequently Asked Questions Why does it need a halogen bulb and not an LED? Halogen bulbs work by passing electricity through a tungsten filament sealed in a halogen gas chamber, which generates both light and significant radiant heat — typically 90% of input energy is released as heat. This radiant warmth at close range is what gently melts the surface of a candle placed beneath the shade. LED bulbs are specifically designed to be energy-efficient, meaning they emit very little heat. An LED GU10 at 5–8W will not generate enough heat to melt wax at the distance the shade sits above a candle. If you install an LED, the lamp will work as a decorative lamp only, without the candle-warming function. What type of candle or wax works best? Wax melts (also called wax tarts or soy melts) in a shallow dish or wax warmer bowl work best — the large flat surface area exposes the maximum amount of wax to the warmth above. Standard pillar candles and jar candles also work if the lamp is positioned so the shade sits approximately 2–4 cm above the candle’s wax surface. Soy wax melts at a lower temperature than paraffin, making it ideal for gentle halogen warming. Tea light candles in a small dish work particularly well for this type of lamp. Is it safe to leave on for extended periods? Halogen bulbs do generate heat — that is their purpose in this lamp. Always place the lamp on a heat-resistant, non-flammable surface. Never leave the lamp unattended for many hours at a time without checking. Ensure that the candle vessel is appropriate for wax warming — a ceramic or metal dish, not plastic. Do not allow wax to overflow the warming vessel. Keep away from flammable materials, children, and pets. The shade and fitting will become warm to the touch during use; this is normal. Does the heron body really look like the product photo? Yes — the heron silhouette form, the brass fitting, and the green shade will match. Natural walnut wood grain will vary between pieces — the specific grain character, tonal warmth, and surface texture of your lamp’s wooden body will differ slightly from the photographs. This is the nature of real wood and is not a defect. Each piece’s grain pattern makes it genuinely singular. Is the Heron Glow certified for North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What bulb does the Heron Glow require?+A GU10 halogen bulb (35–50W recommended), sold separately. Halogen generates the radiant heat needed to melt candle wax. LED GU10 bulbs do not produce sufficient heat for candle warming. How do I use it as a candle warmer?+Install a GU10 halogen bulb, place a candle or wax melt in a low vessel beneath the shade (2–4 cm below), and switch on. Wax softens and releases fragrance within minutes—no flame, smoke, or soot. What are the finish options?+Walnut Wood (natural grain, organic warmth) or Black (matte, contemporary). Shade is forest green on all versions. Brass fittings and a 59″ twisted copper fabric cord complete each finish. Does it require installation or hardwiring?+No. It is plug-and-play with a 59″ twisted copper fabric cord and inline on/off switch. Simply place on any surface and plug in—no electrician or mounting needed. Can I customize the Heron Glow?+Yes. Vakkerlight hand-builds each lamp to order in its own workshop. Contact us to discuss custom sizes, finishes, or specifications for your space.