Passera Chandelier

A closer fit for your
everyday comfort.

Hand-Sculpted Plaster · Birds & Branches Passera Chandelier Hand-sculpted in white plaster-finish gypsum resin, the Passera reads as a small tree set into a chandelier — a slim central trunk, reaching branches, four sculpted birds perched along the limbs, and six tulip-shaped flower lamps blooming at the ends of the lower branches. The all-white finish lets the silhouette read clearly against any wall color or ceiling. At ∅ 35.4″ across, the Passera suits dining rooms, foyers, and bedrooms in French country, coastal, or soft-modern interiors. Hardwired — licensed electrician required Connects to a standard ceiling junction box. Standard chain is 11.8″ and can be extended on request to suit your ceiling height. Plaster surface — dry dust only The gypsum-resin finish is matte plaster. Clean with a soft, dry brush or microfiber cloth. Avoid water, damp cloths, or chemical cleaners — moisture and solvents will mark the surface and are difficult to reverse. Features Hand-Sculpted Plaster Gypsum resin in matte white. Birds & Branches Four songbirds perched along the limbs. Six Tulip Lamps Open flower-form shades. Dimensions × Tap to enlarge Single Size ∅ 35.4″ × H 34.6″ ∅ 90 × H 88 cmHanging chain 11.8″ — extendable on request Recommended Bulbs 6× G9 LED bulbs, 3–4W each, 2700–3000K warm white. Dimmable. Bulbs not included. Specifications Materials Gypsum resin · Fiberglass core Dimensions ∅ 90 × H 88 cm / ∅ 35.4″ × H 34.6″ Light source 6× G9 sockets (LED bulbs recommended, not included) Voltage AC 110–240V Wiring Hardwired Control Standard wall switch · Compatible with most dimmers Hanging chain 11.8″ — extendable on request Body finish Matte white plaster Care Dry dust only — no water or chemical cleaners Environment Indoor only (IP20) Certifications North America · EU · AU · Saudi Arabia Downloads Spec Sheet Installation Guide Frequently Asked Questions What style does this work with? The Passera is a soft, sculptural piece — at home in French country dining rooms, coastal cottages, Hamptons-style bedrooms, transitional foyers, and soft-modern interiors with neutral palettes. The all-white plaster finish reads as both rustic and refined, working against painted walls, plaster ceilings, and natural-fiber rugs. How do I clean the plaster surface? Use a soft, dry brush (a clean paintbrush or makeup brush works well) to dust the branches and birds gently. For more stubborn dust, use a microfiber cloth — dry only. Never use water, damp cloths, polishes, or any chemical cleaner — moisture and solvents will permanently mark the matte plaster finish. What bulbs work best? 6× G9 LED bulbs, 3–4W each, 2700–3000K warm white. Dimmable G9 LEDs are recommended — they keep heat low (important inside the small tulip shades) and warm light gives the white plaster a candlelit glow. Bulbs not included. Is it dimmable? Yes — when paired with dimmable LED G9 bulbs and a compatible Triac or trailing-edge dimmer (sold separately). Dimming softens the white plaster surface into a warmer, candlelit register and is recommended for dining and bedroom installations. Is the Passera certified for North America? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size dining table does the Passera suit?+At ∅ 35.4″ across, the Passera works well over dining tables 36–48″ wide. Its sculptural form reads clearly from all angles and complements intimate to medium-sized dining spaces. What ceiling height do I need?+Standard chain is 11.8″; it can be extended on request to suit your ceiling height. A licensed electrician will adjust the drop during installation to match your room proportions. Can I dim the Passera?+Yes. Use dimmable G9 LED bulbs (3–4W, 2700–3000K) with a compatible Triac or trailing-edge dimmer. Dimming softens the white plaster into a candlelit glow, ideal for dining and bedrooms. Is the Passera made to order, and can I customize it?+Yes. The Passera is hand-sculpted at Vakkerlight's atelier. Chain length can be extended on request, and we offer custom sizing and finishes — contact us to discuss your space.