Alabaster Beam Pendant Light

A closer fit for your
everyday comfort.

Alabaster Beam Pendant Light The Alabaster Beam Pendant runs a continuous tube of natural Spanish alabaster — 100% imported from Spain — the length of the table, its stone cylinders joined by slim brass collars and capped in brass at each end. The integrated warm 3000K LED lights the beam from within along its full length, so the tube glows as one bar of veined mineral light, hovering level on twin cables from a linear brass canopy. Four lengths — L 100, 120, 140, and 160 cm — scale from kitchen islands and dining tables to conference tables and long counters, each with an overall drop of 150 cm on adjustable cables. Alabaster beam pendant — lit detail · Watch on YouTube ↗ Highlights Spanish Alabaster Tube Stone cylinders lit end to end, 100% imported from Spain. Brass-Collared Segments Slim brass rings join the stone sections and cap each end. Four Dining Lengths 100 to 160 cm — from kitchen islands to conference tables. Natural Spanish Stone — Each Piece Is Unique Every cylinder is carved from natural alabaster quarried in Spain. Veining and tone vary from piece to piece — along the beam, each segment carries its own pattern. Your pendant will differ from the photos shown; this variation is the character of genuine stone, not a defect. Sizes Length Dimensions Power Canopy L 100 L 100 cm / 39.4″ · drop H 150 cm ~20W L 40 × W 8 × H 3 cm L 120 L 120 cm / 47.2″ · drop H 150 cm ~25W L 50 × W 8 × H 3 cm L 140 L 140 cm / 55.1″ · drop H 150 cm ~30W L 60 × W 8 × H 3 cm L 160 L 160 cm / 63″ · drop H 150 cm ~40W L 60 × W 8 × H 3 cm 🔍 Dimensions — tap to enlarge Specifications Lengths L 100, 120, 140, or 160 cm · overall drop H 150 cm / 59.1″ Power ~20W / ~25W / ~30W / ~40W by length Material Natural Spanish alabaster (100% imported from Spain), brass Light source Integrated LED — replaceable; if the LED is ever damaged, contact us for a replacement module Color temperature Warm light 3000K — a Triac-dimmable warm-light version is available as a custom order Voltage AC 110–240V Mounting Ceiling, hardwired — twin-cable suspension from a linear brass canopy, hangs level Hanging cables 59″ adjustable, can be lengthened as required Finish Brass canopy, collars, and end caps; white alabaster tube Control Compatible with common wall switches (not included) Environment Indoor use Installation Notes Hardwired ceiling installation — a licensed electrician is recommended. The beam carries real stone weight: anchor the linear canopy to a junction box or ceiling structure rated for the fixture — never drywall alone. Twin cables adjust independently so the beam hangs perfectly level; they can be lengthened as required before shipping. Integrated LED — no bulb installation needed. If the LED module is ever damaged, contact us for a replacement. Handle the alabaster tube with two people and avoid impact — natural stone can chip. For indoor use only. Not suitable for bathrooms or damp locations. FAQ Where does the alabaster come from? The tube is carved from natural alabaster that is 100% imported from Spain — the same Spanish stone prized in fine lighting for its warm tone and translucency. It is genuine quarried stone, not resin or faux-alabaster glass. Which length should I choose for my table? A linear pendant looks best at roughly half to two-thirds of your table's length. The L 100 suits tables of 160–200 cm and most kitchen islands; the L 120 covers tables around 200–240 cm; the L 140 and L 160 carry long dining tables, conference tables, and counters beyond 240 cm. Is the Alabaster Beam dimmable? The standard version is a warm 3000K light that works with a common on/off wall switch and is not dimmable. If you'd like dimming, a Triac-dimmable warm-light version is available as a custom order — contact us and we will reply within 24 hours. Can I replace the LED? Yes — the LED module is replaceable. Nothing needs changing in normal use, since quality LEDs of this type are rated for tens of thousands of hours; and if the LED is ever damaged, contact us and we will arrange a replacement module — we reply within 24 hours. Can I use it in a bathroom? No — this fixture is designed for dry indoor locations only and should not be installed in bathrooms, above sinks, or in covered outdoor areas where it could be exposed to moisture. Why does my pendant look different from the product photos? The tube is natural Spanish stone, so veining and tone vary from piece to piece — along the beam, each segment carries its own pattern by design. No two Alabaster Beam pendants are exactly alike; this is the character of real alabaster, not a defect. Is the Alabaster Beam certified for North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. Which size should I choose for my dining table?+Position the beam at half to two-thirds of your table length. L 100 (39.4″) suits 160–200 cm tables and islands; L 120 (47.2″) fits 200–240 cm tables; L 140 (55.1″) and L 160 (63″) work for long dining, conference, or counter installations. What ceiling height do I need?+The fixture drops 59.1″ on adjustable twin cables from a linear brass canopy. Cables can be lengthened as required before shipping. Ensure your ceiling structure is strong enough—anchor to a junction box or rated framing, never drywall alone. Is the alabaster real stone?+Yes. The tube is 100% natural alabaster imported from Spain, carved from quarried stone. Each piece is unique; veining and tone vary naturally from cylinder to cylinder along the beam—this is character, not a defect. Can I customize the size or cable length?+The four standard lengths (100, 120, 140, 160 cm) are offered. Twin cables are adjustable and can be lengthened before shipping. Contact Vakkerlight's atelier for custom sizing or special requests outside standard options. What does installation require?+Hardwired ceiling installation by a licensed electrician is recommended. The beam carries real stone weight; anchor the linear canopy securely to ceiling structure. Two people needed to handle the alabaster tube safely. Integrated LED requires no bulb; replacement modules available if needed.