Marika Alabaster Chandelier

A closer fit for your
everyday comfort.

Marika Alabaster Chandelier The Marika Chandelier is a ring of solid natural Spanish alabaster — 100% imported from Spain — carved in one continuous circle and lit by an integrated warm 3000K LED, hardwired to the ceiling on fine cables from a brass canopy. Because the ring is stone all the way through, it glows on both faces at once: the outer wall washes the room in soft light while the inner face pools it downward onto the table. Four diameters from Ø 50 to Ø 100 cm hang alone over dining tables and kitchen islands, and two 3-ring clusters — staggered at different heights from one shared canopy — turn a foyer, stairwell, or double-height living room into a drift of floating stone halos. Highlights Solid Spanish Alabaster One continuous stone circle, 100% imported from Spain — no seams, no shell. Glows on Both Faces Outer wall lights the room; inner face pools light onto the table. Single or 3-Ring Cluster Ø 50–100 cm alone, or S / L clusters staggered from one canopy. Natural Spanish Stone — Each Piece Is Unique Every ring is carved from natural alabaster quarried in Spain. Veining and tone vary from ring to ring, so your chandelier will differ from the photos shown — this variation is the character of genuine stone, not a defect. Configurations Configuration Dimensions Single — Ø 50 Ø 50 × H 8 cm / Ø 19.6″ × H 3.1″ Single — Ø 60 Ø 60 × H 8 cm / Ø 23.6″ × H 3.1″ Single — Ø 80 Ø 80 × H 8 cm / Ø 31.5″ × H 3.1″ Single — Ø 100 Ø 100 × H 8 cm / Ø 39.3″ × H 3.1″ 3-Ring Cluster S Ø 50 + 60 + 80 cm / 19.6″ + 23.6″ + 31.5″ 3-Ring Cluster L Ø 60 + 80 + 100 cm / 23.6″ + 31.5″ + 39.4″ Ø 60 Ø 80 Ø 100 🔍 Tap any diagram to enlarge Foyer, Staircase & Double-Height Projects The S cluster (Ø 50+60+80) suits entries and living rooms; the L cluster (Ø 60+80+100) is scaled for stairwells and double-height great rooms. Send us your ceiling height and room dimensions, and we will confirm the right configuration and drop lengths within 24 hours. Specifications Configurations Single Ø 50 / 60 / 80 / 100 (H 8 cm) · 3-ring S Ø 50+60+80 · 3-ring L Ø 60+80+100 Material Natural Spanish alabaster (100% imported from Spain), brass Light source Integrated LED — replaceable; if the LED is ever damaged, contact us for a replacement module Color temperature Warm light 3000K — a Triac-dimmable warm-light version is available as a custom order Voltage AC 110–240V Mounting Ceiling, hardwired — multi-cable suspension from a brass canopy Hanging cables 59″ adjustable, can be extended upon request Finish Brass canopy and fittings, white alabaster ring Control Compatible with common wall switches (not included) Environment Indoor use Installation Notes Hardwired ceiling installation — a licensed electrician is recommended, and professional installation is advised for the 3-ring clusters. The rings are solid stone: anchor the canopy to a junction box or ceiling structure rated well above the total load — never drywall alone. Cables adjust independently so each ring hangs perfectly level; they can be extended upon request before shipping for stairwells and tall ceilings. Integrated LED — no bulb installation needed. If the LED module is ever damaged, contact us for a replacement. Handle each ring with two people and avoid impact — natural stone can chip. For indoor use only. Not suitable for bathrooms or damp locations. Download Support Spec Sheet 3D Files FAQ Where does the alabaster come from? Each ring is carved from natural alabaster that is 100% imported from Spain — the same Spanish stone prized in fine lighting for its warm tone and translucency. It is genuine quarried stone, not resin or faux-alabaster glass: when lit, you can see the real mineral veining drift through the ring, and no two rings repeat. Which size or cluster should I choose? Over a table, the ring should be roughly half to two-thirds of the table's width: Ø 50–60 suit breakfast nooks, bedrooms, and round tables for 4; Ø 80 carries dining tables for 6; Ø 100 works over long tables and in living rooms. The S cluster (Ø 50+60+80) fills entries and living rooms; the L cluster (Ø 60+80+100) is scaled for stairwells and double-height foyers. Send us your dimensions and we will recommend within 24 hours. Is the Marika dimmable? The standard version is a warm 3000K light that works with a common on/off wall switch and is not dimmable. If you'd like dimming, a Triac-dimmable warm-light version is available as a custom order — contact us and we will reply within 24 hours. Can I replace the LED? Yes — the LED module is replaceable. Nothing needs changing in normal use, since quality LEDs of this type are rated for tens of thousands of hours; and if the LED is ever damaged, contact us and we will arrange a replacement module — we reply within 24 hours. Does the Marika need special ceiling support? The rings are solid stone, so the canopy must be anchored to a junction box or ceiling structure rated for the fixture — never drywall alone. For the 3-ring clusters, which hang all three rings from one canopy, we recommend professional installation with a verified mounting point. How do I clean the stone? Dust with a soft, dry cloth — that's all it needs. Avoid water, sprays, and abrasive cleaners on the alabaster; the stone's surface is naturally finished and keeps its glow with simple dry dusting. Can I use it in a bathroom? No — this fixture is designed for dry indoor locations only and should not be installed in bathrooms, above sinks, or in covered outdoor areas where it could be exposed to moisture. Why does my chandelier look different from the product photos? The ring is natural Spanish stone, so veining and tone vary from ring to ring — across a full circle of stone, that drift is the design. No two Marika chandeliers are exactly alike; this is the character of real alabaster, not a defect. Is the Marika certified for North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.