Line Alabaster Wall Light

A closer fit for your
everyday comfort.

A linear alabaster wall sconce: a 2.4-inch hand-cut Spanish alabaster tube on a brushed brass or matte black mount. Three heights — 22.8", 26.4", and 35.4" — sized for bathroom vanities, hallway runs, bedside walls, and stairwells. The natural stone veining differs piece to piece; no two sconces are identical. Why This Sconce Hand-Cut Alabaster Real Spanish alabaster stone — every shade has unique veining and translucency. 3 Color Temps Warm 3000K / Neutral 4000K / Cool 6000K — pick at checkout. 2 Body Finishes Brushed brass or matte black mount, both with white alabaster shade. Before You Order US Installation Note — JBOX Accessory Required Due to its narrow design, this wall lamp does not fully cover a standard US electrical junction box (JBOX). An additional mounting accessory is required for proper installation. Watch the JBOX accessory installation video → Every shade is unique — the one you receive will not match the photo exactly Alabaster is a natural stone. Veining patterns, color tone, and translucency vary from piece to piece. The product photos show typical examples, not the specific shade you'll receive. This is expected and not a defect. Dimming — TRIAC dimmer required The dimmable version works with a TRIAC (forward-phase) wall dimmer, sold separately. Find compatible dimmers on Amazon. The non-dimmable version runs on any standard wall switch. Available Sizes All sizes: ∅2.4" tube · ~3.9" depth from wall · Back panel: L 4.7″ × W 2.4″ × H 2.4″ Size Height Wattage Best For S 22.8" (58 cm) 10W Narrow vanities, bedside, hallway accents M 26.4" (67 cm) 12W Standard bathroom vanity mirrors L 35.4" (90 cm) 14W Tall vanity mirrors, stairwell accents, foyer columns 🔍 Size diagram · click to enlarge × ✓ North America Certified ✓ 2-Year Warranty ✓ Hardwired Indoor ✓ 24h Support Specifications Materials Brass · Natural Alabaster Light source Integrated LED Wattage S: 10W · M: 12W · L: 14W Color temperature Warm 3000K · Neutral 4000K · Cool 6000K (select at checkout) Voltage AC 110-240V Body finish Brushed Brass · Matte Black Shade White Alabaster (natural veining varies) Mounting Wall · hardwired · vertical or horizontal orientation US junction box Back panel L 4.7″ × W 2.4″ does not fully cover a standard US JBOX — a mounting accessory is required Control Standard wall switch (not included) · TRIAC dimmer compatible if dimmable version selected IP rating IP20 · indoor / dry locations only Certification North America · EU · Australia · Saudi Arabia Installation Notes US installations: the narrow back panel does not fully cover a standard US junction box — fit the JBOX mounting accessory. Watch the installation video → Hardwired only — a licensed electrician is recommended. Wires must run to an external wall switch for power control (switch sold separately). Mounts vertically or horizontally — pick the orientation before drilling the wall plate. Bathroom vanity placement: mount the center of the fixture 60-66 inches off the floor, flanking the mirror at eye level. Keep at least 24 inches away from a shower or tub edge — IP20 means indoor dry locations only. Need a custom finish or size not listed? Email info@vakkerlight.com before ordering. Downloads & Resources Spec Sheet Installation Guide JBOX Accessory Video 3D Files Full Linear Series Frequently Asked Questions Will this cover my US junction box? Not on its own. The back panel is only 4.7″ × 2.4″, so it does not fully cover a standard US electrical junction box. A JBOX mounting accessory is required for a proper installation — watch the installation video here and share it with your electrician before the job. Which size alabaster sconce fits my space? 22.8" (10W) works for narrow vanities, bedside walls, and hallway accents. 26.4" (12W) suits standard bathroom vanity mirrors. 35.4" (14W) fits tall mirrors, stairwell accents, and foyer columns. Can I install this in a bathroom? Yes, on a vanity wall away from direct shower steam. IP20 rating means indoor and dry locations only — keep at least 24 inches from a shower or tub edge. Not safe inside a shower enclosure. Is the sconce dimmable? Which dimmer should I use? Pick the dimmable version at checkout. It pairs with a TRIAC (forward-phase) wall dimmer — sold separately. The non-dimmable version uses a standard wall switch. Why doesn't my alabaster look like the photos? Every shade is cut from a natural stone slab, so veining, color tone, and translucency vary piece to piece. The shade you receive won't match the photo exactly. This is part of the material, not a defect. Can I mount the sconce horizontally? Yes. The brass mount accepts both vertical and horizontal orientations. Decide before drilling the wall plate — the LED driver runs the same either way. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. Does it fit a standard US junction box?+ The sconce is deliberately narrow, so its back panel does not fully cover a standard US JBOX. A mounting accessory is required — this short video shows how it is fitted. Send it to your electrician before installation day. Which size should I choose for my bathroom vanity?+ Size S (22.8″) fits narrow vanities. Size M (26.4″) suits standard mirrors. Size L (35.4″) works for tall mirrors. Mount the center 60–66 inches off the floor, flanking at eye level. What's the difference between the two finishes?+ Brushed Brass has a warm metallic tone. Matte Black offers a modern, understated look. Both pair with white alabaster shades and are available in all three heights. Why does my alabaster shade look different from the photos?+ Each shade is hand-cut from natural Spanish stone, so veining, color tone, and translucency vary. No two sconces are identical. This natural variation is expected, not a defect.