Arcadia Luxe Floor Lamp

A closer fit for your
everyday comfort.

Arc Floor Lamp — white marble base, stainless steel arc arm, polished dome. A rectangular white marble block — beveled at the corners, with a finger-hole through its face for repositioning — anchors the base. From it a stainless steel arm rises vertically and then curves in a long arc overhead, extending several feet out from the base before descending to the polished dome shade. The arm and dome are brushed stainless steel; the dome directs warm light downward. Plug-in, three sizes, and available in round or square section arm. The marble base provides sufficient weight to counterbalance the arc without wall attachment. Heavy freight — marble base ships by truck only The genuine marble base is extremely heavy. This product cannot be shipped by standard parcel courier — it requires truck freight delivery to your address. Delivery times and rates differ from standard shipping. A liftgate or ground-level delivery point is recommended. If you live in an upper-floor apartment without elevator access, please contact us before ordering to confirm delivery feasibility. Genuine marble — veining and pattern vary between pieces The base is cut from genuine white marble. The grey veining, mineral inclusions, and tonal variation of each block are determined by where it was cut from the stone slab — no two bases are identical. Product photographs show representative examples. Your lamp’s base will have its own vein pattern. Plug-in — no installation required Runs on a 59″ cord with a push-button switch. Place anywhere, plug in. No hardwiring or electrician required. Features Marble Base Genuine white marble with beveled corners and a carry-hole — heavy enough to counterbalance the arc. Stainless Arc Arm Brushed stainless steel — round or square section. Extends overhead, positions the shade over a sofa or chair. Polished Dome Shade Brushed stainless steel dome directs warm light downward — reading, dining, or ambient. Arm Style — Round Pipe or Square Tube Select arm style at time of order. Both share the same marble base, dome shade, and three available sizes. Tap to enlarge. Comparison Left: Round pipe arm — circular cross-section, softer profile.Right: Square tube arm — rectangular cross-section, more angular and architectural. Round Pipe Circular section arm — the classic arc floor lamp profile. Slightly softer visual line. Square Tube Rectangular section arm — harder edge, more contemporary and architectural feel. Specify in order notes or contact us if unsure which to choose. Sizes W = horizontal reach of the arc. H = total height from floor to arc peak. Tap each diagram to enlarge. Small W 165 × H 190 cm  /  W 64.9″ × H 74.8″ Suited for standard-height ceilings (240–270 cm) · compact living rooms · reading chairs Medium W 180 × H 210 cm  /  W 70.9″ × H 82.6″ Suited for 270–300 cm ceilings · larger sofas · open-plan living Large W 210 × H 230 cm  /  W 82.7″ × H 90.6″ Suited for high ceilings (300 cm+) · double-height spaces · dining tables · grand living rooms Bulb & Light Source E26 (US/CA) or E27 (EU/AU) — max 40W, bulb not included Compatible with LED and Edison filament bulbs up to 40W total. A warm-white LED at 2700–3000 K at 8–15W provides comfortable reading and ambient light from the downward dome position. The polished interior of the dome reflects and concentrates light downward — a globe or standard A-shape E26/E27 LED distributes well within the dome. A large Edison filament globe (G25 or G30 shape) is visible from the side through the dome opening and adds visible filament character if that is your preference. Do not exceed 40W total to avoid overheating the dome shade.Guide to E26 and E27 bulb selection → Specifications Materials Genuine White Marble, Stainless Steel Sizes Small: W 165 × H 190 cm  /  W 64.9″ × H 74.8″Medium: W 180 × H 210 cm  /  W 70.9″ × H 82.6″Large: W 210 × H 230 cm  /  W 82.7″ × H 90.6″ Arm style options Round Pipe  ·  Square Tube — select at order Bulb base E26 (US/CA) or E27 (EU/AU) Max power 40W Light source LED or Edison filament bulb (not included) Voltage AC 110–240V Cord 59″ with push-button on/off switch Power supply Plug-in — no hardwiring required Mounting Freestanding floor lamp Environment Indoor only Base finish White Marble (genuine — vein pattern varies per piece) Arm & shade finish Brushed Stainless Steel (Silver) Shipping ⚠  Truck freight only — marble base is too heavy for parcel courier Certification North America · EU · AU · Saudi Arabia Downloads Spec Sheet Installation Guide 3D Files Frequently Asked Questions Will the lamp tip over if I position it over a sofa? The marble base is specifically sized and weighted to counterbalance the arm at its full horizontal extension without wall attachment or tipping. The marble block’s mass anchors the base while the arm extends overhead. Do not lean on the arm or apply lateral force to the shade — this shifts the center of mass and can destabilize the base. Position the base on a flat, level floor surface. Do not place on rugs with thick pile that can allow the base to shift. For homes with children or pets, position the base in a corner or against a wall as additional security. How do I move the lamp after delivery given the heavy base? The marble base has a finger-hole through its face specifically for repositioning — use the hole with two hands to lift and carry the base short distances. For moving the assembled lamp across a room, it is easier to separate the arm from the base (following the installation guide), move the base and arm separately, then reassemble in the new position. Two people are strongly recommended for moving the lamp. The base is very heavy — use proper lifting posture and footwear. Which size should I choose for my ceiling height? The H dimension is the total height from floor to the peak of the arc (not the shade position). At H 190 cm, the lamp works under a standard 240 cm ceiling with reasonable clearance. At H 210 cm, it is suited for ceilings of 270 cm or higher. At H 230 cm, a ceiling of at least 280–300 cm is recommended to avoid the arm touching the ceiling at its peak. Measure your ceiling height before selecting — the arc rises to its peak before descending to the shade, so the peak height is the critical clearance dimension. Is the Arc Floor Lamp certified for North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide. Sizing & questions Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs. What size Arcadia Luxe should I choose for my living room or reading chair?+Small (W 64.9″ × H 74.8″) fits standard ceilings and compact seating. Medium (W 70.9″ × H 82.6″) suits larger sofas and 9–10 ft ceilings. Large (W 82.7″ × H 90.6″) works best in high-ceiling rooms, double-height spaces, and over dining tables. What's the difference between the round pipe and square tube arm options?+Round pipe has a softer, classic arc profile. Square tube offers a harder edge and more contemporary, architectural appearance. Both share the same marble base, dome, and three sizes—choose based on your design preference. Does this lamp require hardwiring or an electrician to install?+No. The lamp is plug-in only, with a 59″ cord and push-button switch. Simply place it anywhere and plug in—no electrician or wall attachment needed. The marble base is heavy enough to counterbalance the arc. Will my marble base look the same as the photos?+No. Each base is cut from real white marble, so grey veining, mineral inclusions, and tonal variation are unique to each piece. Photos show representative examples; your lamp's base will have its own one-of-a-kind vein pattern. What bulb should I use, and can you customize the lamp?+Max 40W E26/E27 LED or Edison filament bulbs. A warm-white LED (2700–3000 K, 8–15W) provides comfortable reading light. Our atelier makes custom sizes and specifications—contact us to discuss your needs.